Specifications

Storage
313034H 23
Storage
Short Term Storage
(up to 2 days)
1. Relieve pressure, page 10.
2. Leave suction tube and prime
tube in paint pail.
3. Cover paint pail and hoses
tightly with plastic wrap.
4.
a. Engage trigger lock.
b. Leave gun attached to
hose.
c. If you have not already
cleaned them, remove tip
and guard from gun and
clean with water or flush-
ing solvent. A soft brush
can be used to loosen and
remove dried on material
if needed.
d. Wipe paint off outside of gun using a soft cloth
moistened with water or flushing solvent.
Long Term Storage
(more than 2 days)
NOTE: Always circulate Pump Armor storage fluid
through system after cleaning. Water left in sprayer will
corrode and damage pump. Follow Shutdown and
Cleaning, page 18, or Power Flush Cleaning, page 20.
1. Place suction tube in
Pump Armor storage fluid
bottle and prime tube in
waste pail.
2. Turn Prime/Spray valve to
PRIME.
3. Turn power switch ON.
ti9353b
ti9350a
ti9671a
ti8908a
ti2057a
ti9346a
ti5580a