Pathfinder 500W PLEASE READ ME FIRST www.magnumbikes.
L R
BATTERY SAFETY O NOT submerge the battery or allow heavy rain exposure.
Motor Type: Rear Geared Hub Motor Motor Output: 48v 500w Battery Voltage / Amp Hours / Watt Hours: 48v / 13ah /624wh Battery Chemistry: Lithium Nickel Cobalt Manganese (Li-ncm) Estimated Charge Time: 4-4.5 Hrs Estimated Min And Max Range: 30 To 50 Miles (Depending On Riding Style, Terrain, Rider Weight, and Pedal Assist Level.
Specification of H102 Display 1 / 18
Specification of H102 display 4. Key Functions H102 display is included 3 buttons, the distribution position is shown in the figure below, and the functions are as follows Power key, for switching machine and function confirmation, and information switching function. Adjust and increase the button, which is used to adjust the power gear, select the setting options and switch the lights. Adjust and reduce buttons for power gear adjustment, setting options selection and 6KM start assistant.
Specification of H102 display 6. Functional Overview 6.1. Switch on and off machine operation and display Shut down state, continue to press down 2 seconds The meter displays the welcome form and then enters the main form of the system. In the power on state, press continuously 2 seconds, the meter displays the shutdown form and then the system shutdown. The button can be released. 6.2. Main form and operation H102 provides you with a variety of displays to meet your riding needs.
Specification of H102 display Shows the speed of the current ride. 2 Speed unit display: You can set the select speed unit by km/h or mph. 3 6KM Display: When the power gear is not 0 Continuous press for opening the 6km implementation function This location will displays the 6km icon. 4 The lights display: Power On mode hold the key more than 2 seconds, for opening or turning off the lights.
Specification of H102 display ODO: Shows the mileage accumulated by the user. i. TRIP: Display the user's cycling mileage. The single mileage will not ii. be cleared when power off. The user needs to reset the mileage manually in the setting interface. RANGE: Remaining mileage. The remaining mileage is an estimate iii. that may differ from the actual ride. 6.3.
Specification of H102 display 6.4. Setting item description and operation 6.4.1. Enter and exit the Settings page and instructions for the Settings Press the key and at the same time to enter the setting interface. The meter on the setting page is displayed as follows: In the Settings page you can select and to modify or display the items. After the item is selected, press the key to confirm the perforation If more than one page is displayed, there will be PAGE DOWN under the display area.
Specification of H102 display In the Settings page, press and at the same time can quickly exit the Settings page, back to the main page display. Wheel setting and display Select the TIRE SIZE, and then press the key to enter the Wheel Diameter Setting and Display Items page. If the vehicle controller has fixed the vehicle wheel diameter size, this numeric term will not be adjustable and will only be used to display the system wheel diameter size. 6.4.2.
Specification of H102 display Users can adjust the display unit of mileage and speed according to actual needs. Choice of metric or British units. 6.4.3. Maximum speed setting Select the TOP SPEED, and then press the key to enter the Maximum Speed Setting page. This item can be adjusted only by entering the password, which can be selected as 20KM/H, 25HK/H and 32KM/H. Please consult the dealer or vehicle manufacturer for the password. 6.4.4. Battery information.
Specification of H102 display Display current battery voltage, battery capacity, number of charging cycles. If the battery is not recommended by the manufacturer, the battery information may not be displayed properly. 6.4.5. System version Select the VERSION, and then press the key to enter the Version information display page. Display the hardware version and the software version, respectively. 6.4.6.
Specification of H102 display in the main interface is 0-5. If OFF is selected, the adjustable range of the power gear is 0-6. 6.4.7. Mode setting Select the MODE, and then press the key to enter the Mode setting item. SPEED mode or TORQUE mode can be selected depending on the type of power sensor. Default SPEED mode. 6.4.8. Single mileage reset Select the TRIP, and then press the key Press the key and to enter the TRIP page.
Specification of H102 display 7. Common questions and solutions Q: why can't you turn it on? Answer: the boot needs to hold down the power button for 2 seconds. If you can't turn on the check table wire beam and the controller's connector contact is secure. Q: how should the instrument display the fault code? A: please check the corresponding faults according to the fault description and control check. If you can't solve it, please send the vehicle to the nearest dealer.
Warranty Stay Connected @magnumbikes @magnumbikes www.magnumbikes.com info@magnumbikes.
