User Guide

38. Install the new vent pipe with the supplied bolts
and torque them with a torque wrench and 10mm
socket to 106 in-lbs.
37. Install the new vent pipe O-ring gaskets using the
supplied grease to hold them in place.
39. Remove the accessory serpentine belt by rotating
the tensioner bolt with a 15mm wrench. Release the
slack and then pull the belt off the tensioner pulley.
40. Remove the stock belt tensioner assembly by
removing the two mounting bolts with a 15mm socket
wrench.
12/05
Page 12
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com