User Guide

41. Install the new tensioner assembly in place of the
stock unit with the supplied bolts and torque them to
40 ft-lbs.
42. Remove the engine oil pressure sensor connector
from the pressure sensor located at the rear of the val-
ley cover.
43. Remove the engine oil pressure sensor from the
valley cover with a 28mm wrench.
44. Remove the engine valley cover and gasket by re-
moving the ten bolts with a ratchet and 13mm socket.
12/05
Page 13
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com