User Guide

49. Re-connect the oil pressure transmitter electrical
connector.
50. Re-install the oil pressure sensor and torque it to
15 ft-lbs. Re-attach the sensor electrical connector.
51. Remove the engine lift bracket from the rear of
the right cylinder head by removing its two mounting
bolts with a 15mm wrench.
52. The automatic transmission fi ll tube will need to
be moved slighly outward to avoid contact with the
supercharger fuel cross-over pipe.
12/05
Page 15
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com