User Guide

70. Install the fuel manifold O-ring into the recess on
the fuel rail with some of the grease supplied. Next
install the fuel manifold using a 4mm Allen socket
and torque wrench. Torque the manifold fasteners to
106in-lbs.
71. Install the two intake manifold gaskets supplied
onto the recesses in the manifold face. Ensure that the
gaskets are fully seated in recesses.
72. Remove the tape from the ports. Use silicone or
some mild soap and water solution to lubricate the
port surfaces. This will help align the manifold and
bolt holes. (Do not use anything that will damage the
silicone port gaskets.)
69. Install the MAP sensor in its new location using
the supplied bracket and the button head Allen screw
with a 4mm Allen wrench.
12/05
Page 20
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com