User Guide

73. With the help of a assistant carefully set the su-
percharger and manifold assembly in place. Do not
use the black plastic bypass cannister as a lifting point.
This is pre-set from the factory and can be damaged
if you lift with it.
74. Remove the split-looms that support some of the
manifold to cylinder head bolts. Start all ten bolts by
hand to ensure proper alignment of the manifold.
75. Torque all ten bolts that secure the manifold to the
cylinder heads gradually and evenly to a torque of 89
in-lbs. Use a 10mm socket and torque wrench.
76. Install the throttle body onto the new inlet mani-
fold with the originall mounting bolts. Torque the
mounting bolts to 106 in-lbs.
12/05
Page 21
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com