User Guide

105. Attach the hose end of the air tube to the throttle
body. Tighten all clamps securely.
106. Install the PCV inlet hose. Cut a 16” length
length of 3/8” hose supplied and attach one end to the
barb on the right valve cover. Attach the other end of
the hose to the barb on the bottom of the new air tube.
107. Assemble the PCV outlet hose by cutting a 18”
length of the 3/8” hose. Attach one end the hose to the
left valve cover PCV barb.
108. Install the plain end of the 18”PCV outlet hose
on the passenger (right) side of the engine.
PCV hose on the Inlet
manifold barb
Air tube
PCV barb
PCV barb
12/05
Page 29
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com