User Guide

142. Cut the 15” length of Velcro supplied into six
pieces 2-1/2” long. Peel off the paper backing and
install three pieces of Velcro onto the bottom of the
reservoir as shown.
143. Re-install the battery and its connections. Using
the reservoir as a guide attach three pieces of Velcro to
the top of the battery.
144. Trim the molded 90 degree “elbow” hose sup-
plied by cutting 2” from the short leg and 35” from the
long end. Save the long cut piece for later use.
141. The intercooler fl uid reservoir will attach to the
top of the battery with adhesive backed velcro strips.
Clean the bottom of the coolant reservoir with lacquer
thinner, as it must be very clean for the adhesive to
attach. Clean the top of the battery as well. Reservoir
color may vary.
12/05
Page 38
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com