User Guide

167. Cut the BROWN/RED wire and using the

Crimp/Shrink connector provided, connect the extend-

ed WHITE wire form the Magnavolt harness to the

BROWN/RED wires.

168. Carefully replace the Brown/Red wire in the har-

ness and re-cover the harness with the original split-

loom.

BROWN/RED

wire

WHITE wire

166. Peel back the black electrical tape and Split-

loom from the BLUE computer connector. Locate the

BROWN/RED wire.

BROWN/RED

wire

BLUE computer

connector

BROWN/RED

wire

WHITE wire

165. Using the length of solid white wire and the

Crimp/Shrink connector provided, extend the white

wire of the Magnavolt harness. Cover the white wire

with the split-loom provided and carefully route the

wire along the ﬁ rewall, behind the supercharger to the

computer area on the driver side wheel well.

12/05

Page 44

2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com