User Guide

173. Locate the plastic cross-head screw in the rain
gutter to the right of the center windshield wiper.
Remove the screw with a screwdriver. From the
underside in the engine compartment, push the screw
base up and out so that just the hole in the rain gutter
remains.
174. Using a small straight blade screwdriver, open
the harness clamp and pull the harness free.
175. Remove the harness clamp from the fi rewall, it
will not be re-used.
176. Here is the new harness clamp assembly, it will
mount in the rain gutter hole that you removed the
screw from in the previous step.
12/05
Page 46
2005-2006 Pontiac GTO LS2 Supercharger Installation Instructions magnacharger.com