User manual

MAKEVMA100/MAKEVMA101/MAKEVMA102/MAKEVMA103
V. 01 – 07/11/2017 3
4. What is Arduino
®
Arduino
®
is an open-source prototyping platform based in easy-to-use hardware and software. Arduino
®
boards
are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino
®
software IDE (based on Processing).
Surf to www.arduino.cc and www.arduino.org for more information.
5. Overview
MAKEVMA100
The MAKEVMA100 (Arduino
®
Uno compatible) is a microcontroller board based on the ATmega328. It has 14
digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic
resonator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything
needed to support the microcontroller. Connect it to a computer with a USB cable or power it with an AC-to-
DC adapter or battery to get started.
1
USB interface
6
16 MHz clock
2
reset button
7
Atmel mega328p (DIL)
3
digital I/O
8
7-12 VDC power input
4
Atmel mega16U2
9
power and ground pins
5
ICSP
10
analogue input pins
microcontroller .................................................................................................. ATmega328
operating voltage ....................................................................................................... 5 VDC
input voltage (recommended) ................................................................................ 7-12 VDC
input voltage (limits) ............................................................................................. 6-20 VDC
digital I/O pins ................................................................ 14 (of which 6 provide PWM output)
analogue input pins ........................................................................................................... 6
DC current per I/O pin ............................................................................................... 40 mA
DC current for 3.3 V pin ............................................................................................. 50 mA
flash memory ...................................... 32 kB (ATmega328) of which 0.5 kB used by bootloader
SRAM .................................................................................................... 2 kB (ATmega328)
EEPROM.................................................................................................. 1 kB (ATmega328)
clock speed ............................................................................................................. 16 MHz
dimensions
length .............................................................................................................. 68.6 mm
width ............................................................................................................... 53.4 mm
weight ................................................................................................................... 25 g