User manual
MAKEVMA100/MAKEVMA101/MAKEVMA102/MAKEVMA103
V. 01 – 07/11/2017 4
MAKEVMA101
The MAKEVMA101 (Arduino
®
compatible) Mega 2560 is a microcontroller board based on the ATmega2560. It
has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analogue inputs, 4 UARTs
(hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a
reset button. It contains everything needed to support the microcontroller. Connect it to a computer with a
USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most
shields designed for the Arduino
®
Duemilanove or Diecimila.
1
USB interface
7
Atmel mega2560
2
ICSP for 16U2
8
reset button
3
digital I/O
9
digital I/O
4
Atmel mega16U2
10
7-12 VDC power input
5
ICSP for mega2560
11
power and ground pins
6
16 MHz clock
12
analogue input pins
microcontroller ................................................................................................ ATmega2560
operating voltage ....................................................................................................... 5 VDC
input voltage (recommended) ................................................................................ 7-12 VDC
input voltage (limits) ............................................................................................. 6-20 VDC
digital I/O pins .............................................................. 54 (of which 15 provide PWM output)
analogue input pins ......................................................................................................... 16
DC current per I/O pin ............................................................................................... 40 mA
DC current for 3.3 V pin ............................................................................................. 50 mA
flash memory ........................................................... 256 kB of which 8 kB used by bootloader
SRAM ........................................................................................................................ 8 kB
EEPROM...................................................................................................................... 4 kB
clock speed ............................................................................................................. 16 MHz
dimensions
length ............................................................................................................... 112 mm
width ................................................................................................................. 55 mm
weight ................................................................................................................... 62 g