Compatibility Chart

APPLICATION
DUST
EXTRACTOR
TESTED
TOOL
AIR
VOLUME
APPLICATION
DIMENSION
FILTER
EFFICIENCY
SDS-Plus
Drilling
DX01
XRH01Z 12.3 CFM
5/8" diameter
x 2" depth
Greater
than 99%
XCV05Z
XRH05Z,
HR2641
53 CFM
5/8" diameter
x 2" depth
Greater
than 99%
7" Grinding/
Surfacing
VC4710
GA7011C 135 CFM
7" Diamond
Cup Wheel
Greater
than 99%
A SOLUTION FOR ALL YOUR APPLICATIONS
KEY MAKITA DUST ATTACHMENTS LISTED IN OPTION 1 SPECIFIED CONTROL METHODS
X R H 011T XXCV04Z
COMPLIANT COMPLIANT
VC4710 XCV05Z
XRH011X/XRH01ZVX/XRH011TX and XCV05Z/ZX/PT Dust Extractors/Vacuums meet
Option 2 (Objective Data) when used under the conditions tested by Makita
®
. To see
the test procedures, go to makitatools.com/dustmanagement.
XCV04Z and VC4710 Dust Extractors Vacuums meet Option 1 Specified Exposure
Control Methods when the specified equipment is properly used in accordance with
the manufacturer's instruction. See reverse side for details.
When used with
HEPA filter P-79859
DX01 shown
XRH011X shown with DX01
PERFORMANCE
(OBJECTIVE DATA) OPTION
Employer may rely on objective data from
Makita
®
providing evidence the exposure level
is below the permissible exposure limit when
task is performed under the conditions tested
by Makita
®
.
OPTION
2
OPTION
2
SPECIFIED EXPOSURE
CONTROL METHODS
Employer is required to implement the
engineering controls and respiratory
protection specified for the tasks on
"Table 1" of the OSHA Silica Rule.
OPTION
1
OPTION
1
DRILLING CHIPPING/DEMOLITION CUTTING/TUCK POINTINGSURFACING
PURSUANT TO OPTION 2, MAKITA HAS PERFORMED TESTING
AND PRODUCED OBJECTIVE DATA OF THE APPLICATIONS DETAILED BELOW:
makitatools.com/dustmanagement
COMPLIANT PRODUCTS TO OSHA CRYSTALLINE SILICA RULE 29 CFR 1926.1153
COMPLIANT