Drywall Screwdriver MODEL 6823TP MODEL 6 8 2 4 T P MODEL 6 8 2 5 T P Variable Speed I Reversing Variable Speed / Reversing Variable Speed / Reversing INSTRUCTION MANUAL SPECIFICATIONS Capacities Model Self drilling screw Drywall screw 6 mm (114") 5 mm (3116") 6823TP 6824TP 6825TP - N o load speed Overall length Net weight 0 - 2,500 301 mm (11-7/8") 1.5 k g (3.4 Ibs) 0 - 4,500 290 mm (11-318") 1.4 k g (3.1 Ibs) 0 290 mm (11-3/8") 1.4 k g (3.
GENERAL SAFETY RULES (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS. WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
IO. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. 1 1 . Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. 12.Remove adjusting keys or switches before turning the tool on.
Specific Safety Rules . 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its o w n cord. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. 2. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations. 3.Hold the tool firmly. 4. Keep hands away from rotating parts. 5.
FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the trigger. Tool speed is increased by increasing pressure on the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
Hook The hook is convenient for temporary hanging the tool. When using the hook, pull it out in "A" direction and then push it in B direction to secure in place. When not using the hook, return it back to its initial position by following the above procedures in reverse. A Hook B- \ ASSEMBLY Depth adjustment The depth can be adjusted by turning the locking sleeve. Turn it in "A" direction for less depth and in "B" direction for more depth. One full turn of the locking sleeve equals 1.
Removing or installing bit CAUTION: Always be sure that the tool is switched off and unplugged before removing or installing the bit. To remove the bit, first pull the locator out of the locking sleeve. Then grasp the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Sometimes, it helps to wiggle the bit with the pliers as you pull. To install the bit, push it firmly into the magnetic bit holder.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Phillips insert bit (1 0 per pkg.) e53 Size I Part NO. Magnetic bit holder 6.35 - 60 Part No. 784807-9 6.35 - 76 Part No. 784801-1 B H 784212-0A Locator #3 1 784213-A Part No.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.
