Instruction manual

FUNCTIONAL DESCRIPTION

Switch

action

CAUTION:

Before plugging in the tool, always check to see that the switch trigger actuates properly

and returns to the "OFF" position when released.

This tool has

reversing switch to change

the direction of rotation. Move the revers-

ing switch lever to the

side for clockwise

rotation or the

side for counterclockwise

rotation.

start the tool, simply pull the trigger.

Tool speed is increased by increasing pres-

sure on the trigger. Release the trigger to

stop. For continuous operation, pull the

trigger and then push in the

lock

button.

stop the tool from the locked position,

pull the trigger fully, then release it.

Reversing switch lever

Switch trigger

NOTE:

Even with the switch on and motor running, the bit will not rotate until you fit the point of

the bit in the screw head and apply forward pressure to engage the clutch.