Instruction manual
ADDITIONAL SAFETY RULES
FOR
CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is BELOW 10°C
(50OF)
2.
Do not attempt to use a step-up transformer, an engine generator or DC power
3.
Do not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals
with
the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
or ABOVE 4OoC (104OF).
receptacle.
cartridge is not used.
and even a breakdown.
(1)
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge
in
a container
with
other metal objects such
(3)
Do not expose battery cartridge to water or rain.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do not store the tool and Battery Cartridge
in
locations where the tempera-
7.
Do not incinerate the Battery Cartridge even
if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
FOR
CORDLESS IMPACT WRENCH
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2.
Wear ear protectors.
3.
Check the socket carefully for wear, cracks or damage before installation.
4.
Hold the tool firmly.
5.
Always be sure you have a firm footing.
Be sure no one is below when using the tool
in
high locations.
6.
The proper fastening torque may differ depending upon the kind or size of
the bolt. Check the torque
with
a torque wrench.
7.
When driving into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drive into a "live" wire.
not have to be plugged into an electrical outlet.
SAVE THESE INSTRUCTIONS.
6