Gasoline Blower Instruction Manual

ASSEMBLY INSTRUCTIONS

ASSEMBLY OF BLOWER PIPES

CAUTION : Before performing any work on the blower, always stop the

engine and pull the spark plug connectors off the spark

plug.

Always wear protective gloves!

CAUTION : Start the blower only after having assembled it completely.

1. Assemble straight pipe with swivel (3) into flexible pipe (1) and tighten

hose band 㱢76 (2).

2. Install control handle (4) onto straight pipe with swivel and tighten the

clamp screw (5).

3. Assemble flexible pipe to elbow (6) on blower and tighten hose band 㱢

100 (7).

4. Assemble straight pipe (8) to straight pipe with swivel, turning straight

pipe clockwise to lock it into place.

5. Make sure all clamps are tight.

(6)

(7)

(5)

(4)

(1)

(2)

(3)

(8)