Instructions
15 ENGLISH
WIRELESS ACTIVATION
FUNCTION
Optional accessory
What you can do with the wireless
activation function
-
Fig.24
To use the wireless activation function, prepare follow-
activation function
The overview of the wireless activation function
setting is as follows. Refer to each section for detail
procedures.
1. Installing the wireless unit
2. Tool registration for the vacuum cleaner
3. Starting the wireless activation function
Installing the wireless unit
Optional accessory
CAUTION:
surface when installing the wireless unit.
NOTICE:
Clean the dust and dirt on the tool before
installing the wireless unit.
malfunction if it comes into the slot of the wireless unit.
NOTICE:
To prevent the malfunction caused by static,
touch a static discharging material, such as a metal part
of the tool, before picking up the wireless unit.
NOTICE:
When installing the wireless unit, always
be sure that the wireless unit is inserted in the cor-
rect direction and the lid is completely closed.
1.
Fig.25: 1. Lid
2.
Insert the wireless unit to the slot and then close the lid.
with the recessed portions on the slot.
Fig.26: 1. Wireless unit 2.3. Lid
4. Recessed portion
Fig.27: 1. Wireless unit 2. Hook 3. Lid
case or a static-free container.
NOTICE: Always use the hooks on the back of
the lid when removing the wireless unit. If the
hooks do not catch the wireless unit, close the lid
Tool registration for the vacuum
cleaner
NOTE:
registration.
NOTE:
NOTE: During the tool registration, do not pull the
switch trigger or turn on the power switch on the
vacuum cleaner.
NOTE: Refer to the instruction manual of the vacuum
cleaner, too.
-
1.
tool.
2.
Fig.28: 1.
3. -
uum cleaner for 3 seconds until the wireless activation
-
Fig.29: 1.2. Wireless
activation lamp
If the vacuum cleaner and the tool are linked success-
NOTE:
in green after 20 seconds elapsed. Press the wireless
-
-
NOTE: When performing two or more tool registra-
-
Starting the wireless activation
function
NOTE:
cleaner prior to the wireless activation.
NOTE: Refer to the instruction manual of the vacuum
cleaner, too.
switch operation of the tool.
1. Install the wireless unit to the tool.
2. Connect the hose of the vacuum cleaner with the
tool.
Fig.30
3.
Fig.31: 1.