Instructions
9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DSL800
Paper size 225 mm
Pad diameter 210 mm
Rated speed (n) 1,000 - 1,800 min
-1
Dimensions 1,100 mm - 1,520 mm x 259 mm x 273 mm
Rated voltage D.C. 18 V
Net weight 4.5 - 5.7 kg
without notice.
-
Applicable battery cartridge and charger
Charger
residence.
WARNING: Only use the battery cartridges and chargers listed above.
Intended use
Noise
-
Sound pressure level (L
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
-
h, DS
2
or less
2
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
to this instruction manual.