Use and Care Manual
35
1 2
4/5
Files and how to work with them
Use a special saw chain round le for sharpening. Standard
round les are unsuitable. See “Extract from the spare parts
list”.
Type 092 (91VG), 492 (91PX): Saw chain round le, dia.
5/32” (4.0 mm).
Type 290 (90SG), 291 (90PX): Saw chain round le, dia.
11/64” (4.5 mm).
The le should cut only when pushed forwards (arrow). Lift
the le when leading it backwards.
First sharpen the shortest cutter. The length of this cutter is
then the standerd for all other cutters of the chain.
New saw teeth must be led to the exact same shape as the
used teeth, including on their running surfaces.
File depending on chain type (90° to the guide bar).
A le holder makes le guidance easier. It is marked for the
correct sharpening angle of:
α = 30°
(keep the marks parallel with the chain when ling, see il-
lustration) and limits the cut depth to the correct 4/5 of the
le diameter.
After having sharpened the chain, the height of the depth
limiter must be checked by means of a chain gauge. See
“Extract from the spare parts list”.
Correct even the smallest excess height with a special at
le (1). See “Extract from the spare parts list”.
Round o the front of the depth limiter (2).
α
Chain type
092 (91VG), 492 (91PX),
290 (90SG), 291 (90PX)