Use and Care Manual
41
Replacing the suction head
The felt lter (16) of the suction head can become clogged.
It is recommended to replace the suction head once every
three months in order to ensure unimpeded fuel ow to the
carburetor.
To remove the suction head for replacement, pull it out through
the tank ller neck using a piece of wire bent at one end to
form a hook.
15
15
Cleaning the air compartment fan com-
partment
Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protec-
The entire area (15) can now be brushed clean or cleaned
with compressed air.
Cleaning the cylinder
A bottle brush can be used to clean the cylinder ns.
screen
The spark arrester screen should be checked and cleaned
regulary.
Unscrew 3 screws (11) and remove the upper half of the
muer (12) and then the spark arrester screen (14).
Caution: Do not use sharp or pointed objects for screen
cleaning. Damaged or misformed screen wires may result.
Reassembly the spark arrester screen as soon as the upper
muer half and tighten the screws.