Installation Guide

STEP 8

STEP 7

STEP 9

Attention! This step is very important!

- Connect the hinges (F) into the parts (10, 11)

with the hardware (D).

- Connect the part (11) onto the part (02) and the part

(10) onto the part (04) with the hardware (D).

You need to attach the furniture on the wall to avoid any tip over risk. Follow the procedures as showed below.

WALL

Approach as close as

possible to the wall.

Pass the hardware (M) through the hole of the

part (06) as shown in the ﬁgure.

You will need a pencil to mark where you should

drill the wall with a 3/8" drill bit to put in the

hardware (E).

04x

08x