user manual

43
ELECTRICAL SAFETY
Your receiver is supplied with an external 100V - 240V AC, 50Hz
power supply that connects by 12V DC plug to the receiver and by
UK mains plug adapter to the mains. Always connect the 12V DC
plug to the receiver before connecting the mains plug.
If the mains plug breaks or becomes damaged, do not use it. Do
not cut or open the adapter, as this will expose you to dangerous
high voltages present inside. The adapter is non-serviceable and
does not have any replaceable parts inside. If the power supply
is damaged, it must be replaced by the manufacturer, its service
agent, or suitably qualified persons in order to avoid a hazard.
To reduce the risk of electric shock, do not remove screws from the
receiver or open it as it contains no user- serviceable parts. Please
leave all maintenance work to qualified personnel.
PROTECTING THE ENVIRONMENT
If you one day find that your receiver or remote control needs
replacing, or are of no further use to you, do not throw them
out with your household waste. Under the Waste Electrical and
Electronic Equipment (WEEE) regulations, your local council must
provide a suitable recycling centre.
Take attention to the environmental aspects of battery disposal.
Do not throw batteries in the bin or on a fire. Make sure that you
dispose of batteries safely at a local recycling centre. You can also
recycle batteries at many supermarkets.