Use and Care Manual

17Contact us at www.mantis.com
Cordless Tiller/Cultivator Maintenance & Storage
STORAGE
1. Switch the product off, wait for moving parts to stop and remove the battery from
the tiller/cultivator.
2. Clean the tiller/cultivator as described above.
3. Store the tiller/cultivator in a sheltered, dry, frost-free, well-ventilated place.
4. When not in use, the tiller/cultivator should be stored indoors in a dry and high or
locked-up place out of the reach of children. Store the charger and your cordless
tool only in dry locations with an ambient temperature of 50-104°F (10-40°C).
Store your lithium-ion battery pack in a cool, dry place at a temperature of 50-68°F
(10-20°C). Protect the battery pack, charger and cordless tool from humidity and
direct sunlight. Only place fully charged batteries in storage (charged to at least
40%).
5. We recommend using the original package for storage or covering the tiller/
cultivator with a suitable tarp or enclosure to protect it against dust.
6. You can store your tiller/cultivator with the handles in an extended position or
folded down (Figure 7). Loosening handle knobs will allow the handles to fold
down as shown.
TRANSPORTATION
1. Switch the tiller/cultivator off, wait for moving parts to stop and remove the battery.
2. Attach transportation guards, if applicable.
3. Always carry the
tiller/cultivator by its transportation handle.
4. Protect the
tiller/cultivator from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the
tiller/cultivator to prevent it from slipping or falling over.
Figure 7
VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time
of operation, as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
1. Only use the tiller/cultivator as intended by its design and these
instructions.
2. Ensure that the tiller/cultivator is in good condition and well
maintained.
3. Use correct tines and ensure they are in good condition.
4. Keep tight grip on the handle grips.
5. Maintain this tiller/cultivator in accordance with these instructions
and keep tiens well lubricated.
6. Plan your work schedule to spread product use across a longer
period of time.
RESIDUAL RISKS
Even if you are operating this tiller/cultivator in accordance
with all the safety requirements, potential risks of injury and
damage remain. The following dangers can arise in connection
with the use of this product:
1. Health defects resulting from vibration emission if the product is
being used over long periods of time or not properly managed
and maintained.
2. Injuries and damage to property due to broken components or
the sudden impact of hidden objects during use.
3. Danger of injury and property damage caused by thrown objects.
This tiller/cultivator produces an electromagnetic eld during operation! This eld may under some circumstances
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons
with medical implants to consult their doctor and the medical implant manufacturer before operating this product!