Hexagonal 7FT Trampoline with Safety Net, Ladder and Slide The instructions are important for your safety. Please read them thoroughly before you assemble or use the trampoline. Retain this manual for future reference. DO NOT attempt somersaults or flips. Paralysis or death can result if you land on your head or neck! No more than one person on the trampoline at a time. Multiple users increase the risk of injury. Use trampoline only under the supervision of an adult with knowledge of use.
PLEASE DO NOT RETURN TO STORE STOP Please do not return this product to the retailer!! We are able to assist you in ANY way If you find that you have any trouble with assembly or missing or damaged parts please contact the seller.
NO SOMERSAULTS or FLIPS – a fall on the head or neck can reslt in paralysis or even death. Do not use if in case of plaster or any injury to the leg, arm, head, neck or back. No more than ONE user at the same time. Remove all hard or sharp objects including jewelry, glasses, sunglasses or hair clips before jumping. 1 In case of pregnancy, do not use it without your doctor's consent.
Important Warnings Carefully read these warnings before using this product. Failure to follow these warnings can result in serious injury or death. Only one user at any one time! Multiple users can cause loss of control, collision or falls on the trampoline. This could result in serious injury to legs, arms, back, neck or head. Do not use the trampoline when under the influence of alcohol, drugs or medication, which may impair the jumper’s judgement.
Trampoline and Enclosure Parts List Part Number Part Picture Description Quantity 1 Top Rail 6 2 Corner Top Rail with Socket 6 3 Leg Base 3 Trampoline Mat, stitched with Triangle-Rings 1 5 Trampoline Pad 1 6 Enclosure Netting 1 7 Galvanized Spring 36 8 Spring Loading Tool 1 9 Lower Enclosure Pole with Foam 6 10 Upper Enclosure Pole with Foam 6 Slide 1 4 Ladder and Slide Parts List 11 12 Ladder “U” Shape Tube 1 13 Ladder “L” Shape Tube 2 14 Plastic Pedal 1 3
Hardware Parts List Key Number Part Picture Description A Long Bolt (M6X75MM) Quantity 12 B Plastic Spacers 12 C Arc Washer 12 D Self-Locking Screw 10 E Cap Nut (M6) 14 F Wrench 1 G Bolt (M6X75MM) H Slide Fixing Iron Plate 4 2 1
Assembly and Installation Instructions Step 1. Frame Assembly Lay out all frame parts on a dry flat surface as shown in FIGURE 1. Make sure the side with holes on the steel tubing parts face UP for springs installation. Make sure that you have plenty of space and a clean dry area suitable for the assembly of this trampoline. It should be assembled where the trampoline is to be used. The trampoline can become unstable if it is moved after it is assembled.
STEP 2. Leg Support Assembly Attach Corner Top Rails with Sockets (#2) to both ends of Top Rail (#1). Connet the Lege Base (#3) to the socket (#2). Repeat this process for all three legs.
When attaching the springs, do not place your hands, arms, legs or any body parts close to the connector points (i.e. joints connecting the steel tubes). The connector points can become pinch points as the trampoline springs tighten up. Wear heavy duty working gloves to protect your hands from pinching by the springs and protective goggles to avoid injuries to the eyes. Stay steady when installing the springs as it can rebound and fly off if you inadvertently let go or springs not hooked properly.
Step 4. Springs Assembly Attach two more springs in the midpoint between the corner rails. For even distribution of tension and easy assembly, the springs must be placed on the opposite sides of the mat in an alternating manner, i.e. Position 3,4 then Position 21,22. Continue in this manner until all the springs are installed as shown in FIGURE 4. Hint: The number of triangle-rings sewn onto the Mat is equal to the number of holes on the frame.
Step 5. Springs Assembly Continue to attach all the remaining springs in the same manner as above.
Never use the trampoline without the frame pad. The frame pad reduces the risk of getting injured by hitting the metal frame or the springs. Inspect the frame pad before use to ensure all exposed metal parts are fully covered! Step 6. Frame Pad Assembly Lay out the protective pad on the jumping mat as indicated and use tapes of it to attach to the top rails as shown in FIGURE 6.
Step 7. Assemble Lower Enclosure Poles Align lower holes, secure the poles with Long Bolt (# A), Plastic Spacer (# B), Arc Washer (# C) and Cap Nut (# E) as shown in FIRGRE 7.
Step 8. Assemble Upper Enclosure Poles Spread the Safety Net (#6) on the trampoline’s jumping mat, and slide the Upper Pole (#10) into the sleeves of the safety net. 6 10 Connect the Upper Pole (#10) and Lower Pole (#9) with six Screw (#D). Carefully and evenly pull down the safety net. 10 D 9 FIGURE 8 Step 9. Assemble the Safety Net Fasten the safety net to the bottom of the trampoline. Hook the elastic fastening ties to the triangle ring on the jumping mat.
Step 10. Slide Assembly Use four Self-Locking Screws (#D) to lock the Slide Fixing Iron Plate (# H) to the top rail as shown below in FIGURE 10.
Step 11. Ladder Assembly Connect Plastic Pedal (#14) and two Ladder L Shape Tubes (#13) to Ladder U Shape Tube (#12), tighten them with two Bolts (#G) and two Cap Nuts (#E) as shown in FIRGURE 11.
Learning the Fundamental Trampoline Skills The following lessons are suggested for you to learn basic steps and bounces. Before using the trampoline, you should read and understand all warnings. A complete discussion and demonstration of body mechanics and trampoline guidelines should occur between the supervisor and student as well. The bounces are diagrammed on the following page. Lesson 1 A. Mounting and Dismounting – Demonstration of proper techniques B. The Basic Bounce – Demonstration and practice C.
BASIC TRAMPOLINE BOUNCES BASIC BOUNCE 1. Start from a standing position with your head erect and your eyes on the frame pad. 2. Swing your arms forward and up in a circular motion. 3. Bring your feet together and point your toes downwards while in the air. 4. Keep your feet about 15 inches apart when landing on the mat. KNEE BOUNCE 1. Start bouncing from a standing position, keeping your eyes on the frame pad. 2. Land on your knees while keeping your back straight and body erect. 3.
