Use and Care Manual

Press
<
or
>
to set temperature that you want. After operation
the light will flash
2)
Temperature Set
for 5 seconds and display the temperature inside the fridge.
Note: The cabinet temperature in the fridge
> the setting
temperature(+3℃), and
turned on. When the cabinet temperature
in the fridge =
the setting
temperature, compressor stops working.
3)
Parameter Functions
℃: Celsius degree
℉: Fahrenheit degree
ECO: Energy saving mode
MAX: Fast cooling mode
<
-
-
-
<
-
-
<
-
low/med/high battery protection
:
Press
and display℃,
repeat press the button, display
`
`
`
<
-
-
-
<
-
-
<
-
℃,℉,
MAX
ECO
`
in turn. When the corresponding parameter flashes, stop pressing to confirm the
parameter setting.
the same with the one you set before
There is a built-in battery protection module,which can automatically monitor
consumption affects
4)
the car battery voltage. Before the battery power
the normal start of the car, the car fridge will automatically stop working and
the LCD screen display the "E1" code to ensure that the car battery will not be
Battery Protection Function
exhausted.
After restart, the temperature set will be
5) M FPower emory unction
11.7±0.3V
10.7±0.3V
10.2±0.3V
12.7±0.3V
11.7±0.3V
11.2±0.3V
24.6±0.3V
22.6±0.3V
21.6±0.3V
26.0±0.3V
24.0±0.3V
23.0±0.3V
<
-
<
-
-
<
-
-
-
Battery voltage
protection
12V cut out
12V cut in
24V cut out
24V cut in
Note: The voltage level is testing the voltage value of input terminal of the
compressor, not the output terminal of the car battery.
(LOW)
(MED)
(High)
power off.
5