Installation Guide

ISO 13007 Classication
Classication Code Test Characteristics Classication Requirement
RG (reaction resin grout)
Abrasion resistance
†
≤ 0.015 cu. in. (250 mm
3
)
Flexural strength
†
> 4,350 psi (30 MPa)
Compressive strength
†
> 6,525 psi (45 MPa)
Shrinkage
†
< 0.06 in./3.28 ft. (1,5 mm/m)
Water absorption
†
< 0.0002 lb. (0,1 g)
R2 (reaction resin adhesive, improved)
Shear adhesion strength ≥ 2 N/mm²
Shear adhesion strength after water
immersion
≥ 2 N/mm²
Open time: tensile adhesion strength
≥ 0,5 N/mm² after not less than
20 minutes
Shear adhesion strength after thermal
shock
≥ 2 N/mm²
†
28-day cure
ANSI Specication
Test Method Specication Standard Test Results
ANSI A118.3 (5.1) – water cleanability 80 minutes Pass
ANSI A118.3 (5.2)
Initial setting time > 2 hours Pass
Service setting time < 7 days Pass
ANSI A118.3 (5.3) – shrinkage < 0.25% Pass
ANSI A118.3 (5.4) – sag No change Pass
ANSI A118.3 (5.5) – quarry shear bond > 1,000 psi (6,90 MPa) Pass
ANSI A118.3 (5.6) – compressive strength > 3,500 psi (24,1 MPa) Pass
ANSI A118.3 (5.7) – tensile strength > 1,000 psi (6,90 MPa) Pass
ANSI A118.3 (5.8) – thermal shock > 500 psi (3,45 MPa) Pass
Shelf Life and Product Characteristics (before mixing)
Shelf life
2 years when stored in original, unopened packaging at 73°F
(23°C)
Physical state Resin (Part A) and hardener (Part B)
Colors
Available in MAPEI’s palette of 40 colors, organized into 5 color
collections. Refer to MAPEI's grout/caulk color chart. Sample
color chips are available upon request.
VOCs (Rule #1168 of California’s SCAQMD) 8 g per L
Protect containers from freezing in transit and storage. Provide for heated storage on site and deliver all materials at least 24 hours before
work begins.
Application Properties at 73°F (23°C) and 50% relative humidity
Pot life
†
45 to 60 minutes
Full cure
†
14 days
Application temperature range 60°F to 90°F (16°C to 32°C)
†
Pot life and curing time will vary depending on ambient temperature, substrate temperature and humidity.
Packaging
Size
Kit: 1 U.S. qt. (946 mL)
Kit: 1 U.S. gal. (3,79 L)
Kit: 2 U.S. gals. (7,57 L)
Kerapox
y
®
CQ
Kerapoxy
®
CQ