Installation Guide

ManualsBrandsMAPEI ManualsGrout4KA010804

DESCRIPTION

MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout

for precision commercial and residential installations with porcelain, ceramic

and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/

exterior tile, and its nonporous composition helps to prevent water-based

stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ

is formulated with the latest innovation in quartz aggregate, which ensures

color consistency, ease of cleanability and improved workability. In addition,

this grout can be used on sensitive tile surfaces once tested, requires no sealer

and cures naturally from evaporation of the low level of water in the formulation.

Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement

grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based

on typical rates of installers) and requires 65% less time to install.

FEATURES AND BENEFITS

• Stain- and chemical-resistant grout formulation with no sealing required

• Easy cleanability, color consistency and improved workability

• Dries to a hard, uniform color surface in 24 hours and will not stain

surfaces

• Crack-resistant and shrinkage-controlled formulation, with no efflorescence

• BioBlock

technology for mold and mildew resistance

• Is used straight from the pail, without the need to add water

• Specialized pail design with flip-top hinged lid

INDUSTRY STANDARDS AND APPROVALS

• ANSI: Although ready-to-use grouts do not yet have ANSI requirements,

MAPEI Flexcolor CQ meets or exceeds specific tests in ANSI A118.3 and

A118.6 covering other grout types.

LEED v3 Points Contribution LEED Points

MR Credit 5, Regional Materials* ......................................Up to 2 points

IEQ Credit 4.1, Low-Emitting Materials – Adhesives & Sealants ......1 point

IEQ Credit 4.3, Low-Emitting Materials – Flooring Systems ..........1 point

* Using this product may help contribute to LEED certification of projects in the

categories shown above. Points are awarded based on contributions of all

project materials.

LEED v4 Points Contribution LEED Points

MR Credit Material Ingredient Reporting –

Health Product Declaration (HPD) ..................................................1 point

WHERE TO USE

• For grout joints from 1/16" to 1/2" (1,5 to 12 mm)

• Use for grouting interior and exterior floor, walls, countertops and

backsplashes.

• Use for glass tile/mosaics as well as porcelain, ceramic and natural-stone

tile (such as granite, travertine, slate, marble and polished marble), quarry,

and cement-based terrazzo.

• Use for grouting intermittent wet conditions such as bathtub surrounds,

shower walls and shower floors.

• Steam cleaning and power washing of MAPEI Flexcolor CQ is acceptable after

6 to 7 days. Do not use a power-washer setting with greater than 1,800 psi.

Ready-to-Use Grout

with Color-Coated

Quartz

MAPEI

Flexcolor

™

MAPEI

Flexcolor

™

Version: May 2, 2016

Summary of content (6 pages)

PAGE 1
Version: May 2, 2016 Q I C E lor P A M exco Fl ™ Ready-to-Use Grout with Color-Coated Quartz DESCRIPTION MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/ exterior tile, and its nonporous composition helps to prevent water-based stains by providing water repellency to the grout surface.
PAGE 2
EI lor CQ P MA xco e l F ™ • • Use for interior/exterior commercial and residential installations under Res 1, 2, 3 and 6 and Com 1, 2, 3 and 6 per TCNA Environmental Classifications. MAPEI Flexcolor CQ is not for installations in submerged areas or areas hotter than 125ºF (52ºC). MIXING For heavy industrial installations where fatty acids are present, such as commercial kitchens, use MAPEI's Kerapoxy ® IEG CQ. PRODUCT APPLICATION Choose all appropriate safety equipment before use.
PAGE 3
• If haze residue or “picture framing” is experienced after installation, use MAPEI's UltraCare™ Epoxy Grout Haze Remover and UltraCare HeavyDuty Stone, Tile & Grout Cleaner. • Although sealing is not required, MAPEI’s UltraCare™ products can be used for care and maintenance of the grout surface. MAPEI’s UltraCare water-based products are fully compatible with MAPEI Flexcolor CQ. Before applying any UltraCare products, wait for 6 to 7 days after the installation of MAPEI Flexcolor CQ.
PAGE 4
ANSI Specification Test Method Specification Standard Test Results ANSI A118.3, chemical resistance (ASTM C267) Conforms to ASTM C267 Pass (see the Chemical Resistance table below) ANSI A118.3, vertical sag in joints No noticeable change in joint shape Pass ANSI A118.3, cleanability ANSI A118.3 Pass ANSI A118.
PAGE 5
EI lor CQ P MA xco e l F Packaging ™ Size Pail: 0.5 U.S. gal. (1,89 L) Pail: 1 U.S. gal. (3,79 L) Pail: 2 U.S. gals. (7,57 L) Approximate Coverage* per 0.5 U.S. gal. (1,89 L) Tile Size Grout Joint Width 1/16" (1,5 mm) 1/8" (3 mm) 3/16" (4,5 mm) 1/4" (6 mm) 3/8" (10 mm) 1/2" (12 mm) 2" x 2" x 1/4" (50 x 50 x 6 mm) 50 sq. ft. (4,65 m2) 25 sq. ft. (2,32 m2) 17 sq. ft. (1,58 m2) 13 sq. ft. (1,21 m2) 9 sq. ft. (0,84 m2) 7 sq. ft. (0,65 m2) 4-1/4" x 4-1/4" x 1/4" (108 x 108 x 6 mm) 107 sq. ft.
PAGE 6
EI lor CQ P MA xco e l F ™ Continued from Page 2 5. If joints are not fully flush, MAPEI Flexcolor CQ can be re-applied after 24 hours of drying by repeating steps 1 through 4. The product will bond to itself. 6. Clean tools and the surface with fresh water while the product is wet. PROTECTION AND MAINTENANCE • Light foot traffic is acceptable 24 hours after grouting. • To develop stain resistance and for a full cure, allow 3 days before water exposure. • Protect the product from freezing.