Installation Guide

ManualsBrandsMAPEI ManualsGroutFlexcolor 3D 0.5-Gallon Forever Sky Acrylic Premix Grout

DESCRIPTION

MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent

specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors

with translucent characteristics that not only reflect but also refract light. This allows

the grout to transition in color to complement the tile color. The “translucent effect”

is most noticeable with the color Crystal Moon (#201), while the other nine colors

exhibit a more pronounced “iridescent effect.”

MAPEI Flexcolor 3D is also formulated for commercial and residential interior

installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the

dense surface structure of the grout helps to prevent water-based stains on the

grout surface.

MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead

aggregate, which ensures color consistency, ease of cleanability and improved

workability. In addition, this grout can be used on sensitive tile surfaces once tested,

requires no sealer and cures naturally from evaporation.

Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement

grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than

powder grouts.

FEATURES AND BENEFITS

• Stain- and chemical-resistant grout formulation with no sealing required

• Easy cleanability, color consistency and improved workability

• Dries to a hard, uniform color surface in 24 hours and will not stain

surfaces

• 70% recycled content for Green Squared Certification (Level 3)

• Nonsag formulation for vertical backsplashes

• Crack-resistant and shrinkage-controlled formulation, with no efflorescence

• BioBlock

technology for mold and mildew resistance

• Ready-to-use straight from the pail, with no water required

• Available in a color palette matching the most popular glass mosaic designs

INDUSTRY STANDARDS AND APPROVALS

• ANSI: Although ready-to-use grouts currently do not have ANSI requirements,

MAPEI Flexcolor 3D meets or exceeds specific tests in ANSI A118.3 and

A118.6 covering other grout types.

LEED v4 Points Contribution LEED Points

Green Squared (ANSI A138.1 – 2011 v2) for Ceramic

Tile, Glass Tile and Tile Installation Materials* ........................................1 point

Health Product Declaration (HPD)* ..............................................Up to 2 points

* Using this product may help contribute to LEED certification of projects in the

categories shown above. Points are awarded based on contributions of all

project materials.

Additional Green Certifications

• CRI Green Label Plus #GLP01646. Refer to the CRI's Website at

www.carpet-rug.org for additional information.

• Living Building Challenge (LBC) Red List Free: This product has been

verified per the most current Red List on the LBC’s Website.

WHERE TO USE

• For grout joints from 1/16" to 1/2" (1,5 to 12 mm)

• Use for grouting interior floors, walls, countertops and backsplashes.

Ready-to-Use, Translucent

Grout with an “Iridescent

Effect” Finish

Flexcolor

™

Flexcolor

™

MAPEIMAPEI

Version: July 6, 2018

Summary of content (6 pages)

PAGE 1
Version: July 6, 2018 r o l o c D x 3 e l F ™ EI P MA Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish DESCRIPTION • Crack-resistant and shrinkage-controlled formulation, with no efflorescence MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light.
PAGE 2
or l o xc 3D Fle ™ • Use for glass tile/mosaics as well as porcelain, ceramic and natural-stone tile (such as granite, travertine, slate, marble and polished marble), quarry and cementbased terrazzo. • All tiles should conform to ANSI 137.1 or ANSI 137.2 Glass Tile Standard; otherwise, see tile manufacturers for details and recommendations. • Use for grouting intermittent wet conditions such as shower floors, bathtub surrounds and shower walls.
PAGE 3
. Remove excess grout from the tile surface, holding the float at an almost 90-degree angle to the surface and moving the float diagonally to the joints while the grout is still fresh. 4. The grout surface should be flush with the tile edge. 5. Use MAPEI’s UltraCare ™ Grout Release when grouting glass tile with “mixed media” inserts such as natural stone, porcelain and aluminum, to facilitate the cleaning and to minimize the formation of grout haze on the tile. CLEANUP 1.
PAGE 4
or l o xc 3D Fle ™ PEI MA ANSI Specification Test Method Specification Standard Test Results ANSI A118.3 – chemical resistance Conforms to ASTM C267 Pass (see the Chemical Resistance table below) ANSI A118.3 – vertical sag in joints No noticeable change in joint shape Pass ANSI A118.3 – cleanability ANSI A118.3 Pass ANSI A118.
PAGE 5
or l o xc 3D Fle Application Properties† at 73°F (23°C) and 50% relative humidity † Protect from light foot traffic 24 hours Protect from normal foot traffic 48 hours Protect from commercial/heavy foot traffic 6 to 7 days ™ PEI MA Protection and curing times will vary depending on ambient temperature, substrate temperature and humidity. Packaging Size Pail: 0.5 U.S. gal. (1,89 L) – including sponge and white scrubpad Approximate Coverage†† per 0.5 U.S. gal.
PAGE 6
or l o xc 3D Fle ™ PEI MA Refer to the SDS for specific data related to health and safety as well as product handling. LEGAL NOTICE The contents of this Technical Data Sheet (“TDS”) may be copied into another project-related document, but the resulting document shall not supplement or replace requirements per the TDS in effect at the time of the MAPEI product installation. For the most up-to-date TDS and warranty information, please visit our website at www.mapei.com.