Operation Manual

7
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
BASIC
OPERATIONS
ENGLISH
BASIC OPERATIONS –AUDIO CD–
PLAYING CDS
1. 2. 3. 4.
2. 3.
1.
4.
1. Press the POWER button on the unit or on
the remote controller to turn on the power.
2. Press the 0 button on the unit or on
the remote controller. Place the CD to be
played in the extended disc tray while
ensuring that the label with the printed text
is facing up.
In the case of a single (8 cm) CD, align it
with the indentation in the center of the
tray.
3. Press the 0 button to retract the disc tray.
Once the disc tray has been retracted, “TOC
Reading” appears on the display, after
which the total number of CD tracks and
total playing time are displayed.
Caution
Do not close the disc tray by pressing it in with your
hand, as this will damage it.
4. Press the 3 button on the unit or remote
controller to start play. Adjust the volume
level at the amplifi er.
PAUSING PLAY
During play, press the 8 button on the unit or remote
controller to temporarily suspend play.
To resume play from the place where it was
temporarily suspended, press the 3 button or 8
button on the unit or the 3 button or 8 button on
the remote controller.
STOPPING PLAY
Press the 7 button on the unit or remote controller
during play.
REMOVING THE CD
After play has fi nished, press the 0 button on the
unit or on the remote controller to extend the disc
tray, and remove the CD.
After the CD has been removed, press the 0 button
again to retract the disc tray. The disc tray should
always be retracted when the unit is not in use.
PLAYING A SPECIFIC TRACK
¡
/
¢4
/
1
Numeric
button 0-9
¢
4
SPECIFYING THE NUMBER OF A TRACK
TO BE PLAYED (DIRECT SEARCH)
Select the number of the track to be played directly
by pressing the numeric buttons (0 to 9) on the
remote controller.
To select track number 10 or above, use the numeric
buttons to select the higher digit first and then
select the lower digit.
Once the number of the track is selected, play will
start automatically.
(Example)
Track 3: Press the “3” numeric button.
Track 12: Press the “1” numeric button. Within
1.5 second, press the “2” numeric
button.
PLAYING A PREVIOUS OR SUBSEQUENT
TRACK (TRACK SKIP)
ADVANCING TO A SUBSEQUENT TRACK
Press the ¡/¢ button on the unit or ¢ button
on the remote controller for the number of times
equivalent to the number of tracks through which
play is to be advanced.
RETURNING TO THE START OF THE CURRENT
TRACK OR A PREVIOUS TRACK
When the 4/1 button on the unit or 4 button
on the remote controller is pressed, play returns to
the start of the current track. Pressing the same
button several times will locate the start of a track
the equivalent number of track starts before the
current play position.
PLAYING A SPECIFIC PART OF A
SPECIFIC TRACK
¡
/
¢4
/
1
¡
1
SEARCHING A SPECIFIC PART OF A TRACK
(SEARCH)
While listening to a track being played, it is possible
to search for a specifi c part of that track by a forward
or backward search.
FORWARD SEARCHING THROUGH THE
CURRENT TRACK
The search (forward search) mode is established by
holding down the ¡/¢ button on the unit or ¡
button on the remote controller. Holding down the
button initiates a forward search.
BACKWARD SEARCHING THROUGH THE
CURRENT TRACK
The search (backward search) mode is established
by holding down the 4/1 button on the unit or
1 button on the remote controller. Holding down
the button initiates a backward search.
CD6003_N_01_Eng.indd 7CD6003_N_01_Eng.indd 7 09.5.29 4:00:14 PM09.5.29 4:00:14 PM