Operation Manual

9
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
OTHERS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
ENGLISH
ADVANCED CONNECTIONS
1. Press the POWER switch to turn the unit
on.
2. During stop, press the MENU button on the
remote controller.
3. Use the 4 or ¢ button to display “TIMER
Play=>” on the display, then press the
ENTER button on the remote controller.
4. Use the 4 or ¢ button to display “2
On” on the display, then press the ENTER
button on the remote controller.
5. To play disc media by timer, display “1 CD”,
using the 4 or ¢ button, then press the
ENTER button on the remote controller.
6. To play USB media by timer, display “2
USB/iPod”, using the 4 or ¢ button,
then press the ENTER button on the remote
controller.
If USB media is selected, the track to be
played during timer play can be selected.
For the selection method, refer to USB
media selection method (see page 16).
7. Press the MENU button on the remote
controller to complete the setting.
8. If disc media is selected, insert the disc to
be played.
9. Set the audio timer.
Note
If selecting USB with timer play, please connect
USB media to the unit beforehand.
ADVANCED OPERATIONS –AUDIO CD–
TO CHANGE TIME DISPLAY
TIME
Press the TIME button on the remote controller.
Each time TIME button is pressed, display will
change in the following order.
Track elapsed
time
Total remaining
time
Track remaining
time
• Track remaining time
(The remaining playing time from the playing
point to the end of the current track)
“REMAIN” is displayed
• Total remaining time
(The remaining playing time from the playing
point to the end of the last track)
“REMAIN TTL” is displayed
REPEAT PLAY (PLAYING THE
SAME TRACKS REPEATEDLY)
A-B
REPEAT
PLAYING ALL TRACKS REPEATEDLY
(ALL-TRACK REPEAT)
This function repeatedly plays all the tracks. Repeat
play is possible even during random play or program
play.
Press the REPEAT button on the remote controller.
The “RPT” indicator on the display lights, and the
repeat play of all the tracks starts.
Light up
To stop all track repeat play and resume normal play,
press the REPEAT button on the remote controller
to turn off the “RPT” indicator on the display.
PLAYING ONE TRACK REPEATEDLY
(1-TRACK REPEAT)
This function repeatedly plays one track only. Even
during random play or program play, it repeats the
track being played.
Press the REPEAT button on the remote controller
twice while the track to be repeated is playing.
The “RPT” and “1” indicators light, and track now
playing is repeated.
Light up
To stop 1-track repeat play and resume normal play,
press the REPEAT button on the remote controller
to turn off the “RPT” indicator on the display.
PLAYING A SPECIFIC PART REPEATEDLY
(A-B REPEAT)
This function repeatedly plays a specifi c part of a
track that you want to hear.
1. During play, press the A-B button on the
remote controller at the start point of the
part to be repeated.
The “A-” indicator on the display now
lights.
Light up
2. Press the A-B button on the remote
controller at the end point of the part to be
repeated.
The “A-B” indicator on the display now
lights, and the designated part (from point
A to point B) is played repeatedly.
Light up
To stop A-B repeat play and resume normal play,
press the A-B button on the remote controller to
turn off the “A-B” indicator on the display.
Note
The A-B repeat play function cannot be used during
random play.
CD6003_N_01_Eng.indd 9CD6003_N_01_Eng.indd 9 09.5.29 4:00:14 PM09.5.29 4:00:14 PM