Operation Manual

12
BASIC
CONNECTIONS
BASIC
OPERATIONS
ADVANCED
CONNECTIONS
ADVANCED
OPERATIONS
TROUBLESHOOTING
NAMES AND
FUNCTIONS
OTHERS
ADVANCED
OPERATIONS
ENGLISH
0
9
0
PROGRAM
SCROLL/RECALL
CANCEL
4
9
¢
CHECKING THE PROGRAM OR DELETE
PROGRAM CONTENTS
During programming operation or program play,
press the SCROLL/RECALL button on the remote
controller.
With program play, each time the SCROLL/RECALL
button is pressed, the programmed tracks are
displayed one after another in sequence on the
main display.
With delete program play, the deleted tracks are
displayed one after another in sequence on the
main display.
CHANGING THE PROGRAM OR DELETE
PROGRAM CONTENTS
DELETING TRACKS WHICH WERE PROGRAMMED
FOR PROGRAM PLAY
When the SCROLL/RECALL button on the remote
controller is pressed during programming, the
programmed tracks are displayed one after the
other in sequence.
As soon as the track to be deleted from the program
has appeared, press the CANCEL button on the
remote controller immediately.
CANCELING THE DELETION OF TRACKS WHICH
WERE DELETED FOR DELETE PROGRAM PLAY
When the SCROLL/RECALL button on the remote
controller is pressed during delete programming,
the deleted tracks are displayed one after the other
in sequence.
As soon as the track whose deletion is to be
canceled has appeared, press the CANCEL button
on the remote controller immediately.
ADDING TRACKS TO THE PROGRAM
Press the PROGRAM button on the remote controller
during stop. The status of the PROG indicator in the
display changes from lighted to fl ashing, and more
tracks can be added to the program.
RETURNING PROGRAM PLAY TO
NORMAL PLAY (CANCELING THE ENTIRE
PROGRAM)
Press the 7 button on the unit or remote controller
twice during program play or once during stop. The
PROG indicator on the display goes off, and the
entire program is canceled.
Alternatively, a program can be canceled when the
disc tray is opened by pressing the 0 button on the
unit or on the remote controller.
PRECAUTIONS FOR PROGRAM AND
DELETE PROGRAM PLAY
• When using the numeric buttons to select tracks
1 to 9 on a CD with 10 or more tracks in total,
allow 1.5 seconds or so to elapse after the button
corresponding to the number of the previous
track was pressed before pressing the button
corresponding to the number of the next track.
• When using the numeric buttons to select track
10 or up on a CD with 10 or more tracks in
total, press the button corresponding to lower
digit within 1.5 seconds or so after the button
corresponding to the higher digit was pressed.
• When using the 4 and ¢ buttons for
programming, keep pressing one of these buttons
with less than 1.5 seconds or so in between until
the number of the desired track is displayed.
• If the total time for a program exceeds 99 minutes
59 seconds, the time display will appear as “– – :
– –”.
CD-TEXT
The text information recorded on a CD-TEXT disc
can be viewed on this unit.
A maximum of 32 characters can be displayed.
DISPLAY OF PLAYER
When the TEXT button on the remote controller is
pressed, the CD-TEXT information will be displayed
as outlined in the diagram on the right.
However, the recorded information differs from one
disc to another so that not all the information given
below will necessarily be displayed.
DURING PLAY
Each time the TEXT button on the remote controller
is pressed, the information items are displayed in the
following sequence. During play, the information of
track now playing is mainly displayed.
Title of track xx now playing
xx Artist (artist of track xx)
Album Title
ADVANCED OPERATIONS –AUDIO CD–
CHANGING THE INFORMATION ITEM
THAT IS DISPLAYED FIRST
2. 3. 4.
TEXT
1. 5.
2. 3. 4.
1. During stop, press the MENU button on the
remote controller.
2. Use the 4 or ¢ button to display “CD
Setup =>” on the display, then press the
ENTER button on the remote controller.
3. Use the 4 or ¢ button to display “File
Info =>” on the display, then press the
ENTER button on the remote controller.
4. To display the track titles fi rst, display “2
Title”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller.
To display the artist names fi rst, display “3
Artist”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller.
To display the album titles fi rst, display “4
Album”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller.
To always display time information without
displaying text information, display “5
Time”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller.
5. Press the MENU button on the remote
controller to complete the setting.
CD6003_N_01_Eng.indd 12CD6003_N_01_Eng.indd 12 09.5.29 4:00:16 PM09.5.29 4:00:16 PM