User Manual

A-B repeat playback
You can specify the section within a track that you want to hear, and play it
back repeatedly.
1
During playback, press REPEAT A-B at the point where
you want to start playing repeatedly.
“Repeat A-” is displayed on the display.
2
Press REPEAT A-B at the point where you want to stop
playing repeatedly.
“Repeat A-B” is displayed on the display, and the specified section
(point A to point B) is played back repeatedly.
o
To cancel A-B repeat playback
Press REPEAT A-B.
0
A-B repeat playback cannot be used during random playback.
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROG.
“Program” is displayed on the display.
2
Use 0 – 9 to select the tracks.
GExampleH
Track 4 : Press number 4 to select track 4.
Track 12 : Press numbers 1 and 2 consecutively to select track 12.
0
The number you enter is set about 1.5 seconds after you press
the number buttons. To enter a two-digit number, be sure to press
the two number buttons, one immediately after the other.
3
Press 1.
Playback starts in the programmed order.
0
When RANDOM P is pressed during program playback, the programmed tracks
are played in random order.
0
When REPEAT L is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
0
The program is cleared when the disc tray is opened or the power is turned off.
Contents Connections Playback Settings Tips Appendix
30
Front panel Display Rear panel Remote Index