User Manual

H/P AMP GAIN
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the “LOW” side if the headphones have low impedance and on the
“HIGH” side if they have high impedance.
LOW
(Default):
Set the gain of the headphone amplifier to
“LOW”.
MIDDLE:
Set the gain of the headphone amplifier to
“MIDDLE”.
HIGH:
Set the gain of the headphone amplifier to
“HIGH”.
NOTE
0
The headphone volume varies depending on the “H/P AMP GAIN” setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
Digital Out
Switched the digital audio output on/off.
On
(Default):
Use the digital audio output connector.
Off: Do not use the digital audio output connector.
Contents Connections Playback Settings Tips Appendix
45
Front panel Display Rear panel Remote Index