User guide

8
ENGLISH
Getting Started ConnectionsConnections
Basic Operations Advanced Operations TroubleshootingExplanation termsInformation Specifi cations Index
Connecting the power cord
Do not plug in the power cord until all connections have been
completed.
To household power outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
• Do not use a power cord other than the cord supplied with this unit.
Connecting other equipment
n RS-232C
Connect an external control device or other device for servicing. (Use
a straight cable for the connection.)
External control device
n FLASHER IN
This unit can be controlled by connecting a control box or other control
device to this unit.
GND
Signal
Control box
or
control device
Connecting a USB memory device
USB
memory
device
NOTE
• A computer can not be connected to and operate the unit via its
USB port.
• Do not use an extension cable when connecting a USB memory
device.
• For details about USB memory devices, see “USB memory”
(vpage30).
1.NA7004U_ENG_2nd_100831_校了.indd 81.NA7004U_ENG_2nd_100831_校了.indd 8 2010/08/31 20:31:212010/08/31 20:31:21