Owner`s manual

Playing files stored on USB memory
devices
1
Press USB to switch the input source to “USB”.
2
Use ui to select the file or folder, then press ENTER.
3
Use ui to select the file, then press ENTER.
Playback starts.
0
If the USB memory device is divided into multiple partitions, only the top partition
can be selected.
0
Marantz does not guarantee that all USB memory devices will operate or receive
power. When using a portable USB hard disk drive (HDD) which came with an AC
adapter, use that device’s supplied AC adapter.
NOTE
0
USB memory devices will not work via a USB hub.
0
Playback is not possible when connected via the front panel’s USB port.
0
Do not use an extension cable when connecting a USB memory device. This may
cause radio interference with other devices.
0
Files can be read from a USB memory device by connecting the device to this unit.
The file reading time varies according to the amount of data saved on the USB
memory device. Several minutes may be required to read the maximum
permissible number of files and folders.
0
Note that Marantz will accept no responsibility whatsoever for any problems
arising with the data on a USB memory device when using this unit in conjunction
with the USB memory device.
Contents Connections Playback Settings Tips Appendix
52
Front panel Rear panel
Remote control
unit
Index