Owner`s manual

o
USB memory devices cannot be played back
Symptom Cause / Solution Page
“No Connection” is
displayed.
0
This unit may not recognize the USB memory device due to poor connection, etc. Make sure that the
connection is made properly by taking actions such as disconnecting and reconnecting the USB memory
device.
22
0
USB memory devices of a mass storage class or those compatible with MTP are supported. －
0
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
－
0
The USB memory device must be formatted to FAT16 or FAT32. －
0
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
－
Files on the USB memory
device are not displayed.
0
Files of a type not supported by this unit are not displayed. 51
0
This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify
the folder structure of the USB memory device.
－
0
When multiple partitions exist on the USB memory device, only files on the first partition are displayed. －
Files on a USB memory
device cannot be played.
0
Files are created in a format that is not supported by this unit. Check the formats supported by this unit. 51
0
Files that are copyright protected cannot be played on this unit. －
Contents Connections Playback Settings Tips Appendix
94
Front panel Rear panel
Remote control
unit
Index