Basisversie Geavanceerde versie A/V Surround Receiver Gebruiksaanwijzing DVD Informatie NR1603
n VEILIGHEIDSMAATREGELEN WAARSCHUWING: De bliksemflits met het pijlsymbool in de gelijkzijdige rechthoek is bedoeld om de gebruiker te waarschuwen voor de aanwezigheid van niet-geïsoleerde “gevaarlijke spanning” in het product die krachtig genoeg kan zijn om elektrische schokken te veroorzaken.
n ALVORENS TE GEBRUIKEN z z Muur zz Plaats dit toestel niet in een kleine afgesloten ruimte, zoals een boekenkast e.d., omdat anders de warmte niet op gepaste wijze kan worden afgevoerd. • Meer dan 0,3 m is aanbevolen. • Plaats geen andere apparatuur op het toestel. Informatie DVD z z Geavanceerde versie • Vermijd hoge temperaturen. Zorg er bij installatie in een audiorack voor, dat de door het toestel geproduceerde warmte goed kan worden afgevoerd. • Hanteer het netsnoer voorzichtig.
Aan de slag Inhoud Basisversie·················································································4 DVD Informatie···············································································132 Installatie/aansluiting/Instelling van luidsprekers (Geavanceerd)··············································································75 Installatie luidsprekers·································································75 Luidsprekeraansluiting······································
Accessoires Functies r t u i Met een discreet-circuitconfiguratie, zorgt de vermogensversterker voor een exact dezelfde kwaliteit voor alle 7 kanalen (50 W x 7-kanaals, 8 Ω) Het toestel is uitgerust met een vermogensversterker die natuurgetrouw hifi-geluid weergeeft in de geluidsmodus waarbij de geluidskwaliteit en het vermogen voor alle kanalen gelijk is. De vermogensversterker is uitgerust met een discreetcircuitconfiguratie waardoor een surround-soundweergave van hoge kwaliteit ontstaat.
Functies Direct Play voor iPod® en iPhone® via USB (vblz. 18) U kunt muziekgegevens van een iPod afspelen wanneer u de bij de iPod geleverde USB-kabel aansluit via de USB-poort van dit toestel en tevens een iPod bedienen met de bij dit toestel geleverde afstandsbediening. M-XPort (marantz-eXtension Port) (vblz.
Basisversie Hier worden de aansluitingen en de basisbedieningsmethoden van het toestel beschreven. F Instellingen vblz. 24 F Weergave (Basisbediening) vblz. 31 Geavanceerde versie F Aansluitingen vblz. 5 Basisversie Basisversie F Een luistermodus selecteren (Geluidsmodus) vblz.
Aansluitingen Basisversie Belangrijke informatie Voer de aansluitingen uit voordat u dit toestel gebruikt. Om een thuisbioscoop te maken die video en audio met hogere kwaliteit kan afspelen door optimaal gebruik te maken van de capaciteiten van dit toestel en uw videoapparatuur, moet u dit toestel op elk van uw videoapparaten aansluiten met HDMI-kabels. nn HDMI-compatibel apparaat Als uw videoapparaat geen HDMI-aansluitingen ondersteunt, moet u de volgende aansluiting gebruiken. vblz. 10 vblz.
Belangrijke informatie Dit toestel is uitgerust met drie soorten video-ingangsaansluitingen (HDMI, Component video en video) en drie soorten videouitgangsaansluitingen(HDMI, Component video en video). Deze functie converteert automatisch verscheidene formaten voor ingaande videosignalen naar de dit toestel naar het gebruikte formaat voor uitgaande videosignalen vanaf dit toestel naar een televisiescherm.
Een HDMI-compatibel toestel aansluiten nn Voordat u dit toestel aansluit op de TV via HDMI-aansluitingen (vblz. 8) nn Dit toestel aansluiten op een TV via HDMI-aansluitingen (vblz. 9) • Weergave met hoge kwaliteit door audio en video te verzenden via digitale signalen. HDMI-aansluitingen kunnen HD-video en audioformaten met hoge kwaliteit die door Blu-ray discspelers (Dolby Digital Plus, Dolby TrueHD, dts-HD, dts-HD Master Audio) worden gebruikt, uitzenden.
Een HDMI-compatibel toestel aansluiten nnOver de ARC (Audio Return Channel) functie Ondersteunt de TV die op dit toestel moet worden aangesloten, de ARC-functie? Ja Nee Dit toestel aansluiten op een TV via HDMI-aansluitingen (vblz. 9) Dit toestel aansluiten op een TV via HDMI-aansluitingen (vblz. 9) Wanneer u de ARC-functie gebruikt, sluit u een apparaat aan met een “standaard HDMI-kabel met ethernet” of een “HDMI-kabel met hoge snelheid en ethernet” voor HDMI.
Een HDMI-compatibel toestel aansluiten • Er worden geen videosignalen uitgevoerd wanneer de ingevoerde videosignalen niet overeenkomen met de resolutie van de monitor. Wanneer dit het geval is, moet u de resolutie van de Blu-ray Disc-speler/DVD speler instellen op een voor de monitor geschikte resolutie.
Een HDMI-compatibel toestel aansluiten Dit toestel aansluiten op videoapparaten via HDMI-aansluitingen Kabels die voor aansluitingen worden gebruikt Basisversie Digitale camcorder HDMI OUT Audio- en videokabels (apart verkrijgbaar) HDMI-kabel • Deze interface maakt de overdracht van digitale videosignalen en digitale audiosignalen via een enkele HDMI–kabel mogelijk.
Een HDMI-compatibel toestel aansluiten nnDeep Color (vblz. 145) Gebruik een kabel die compatibel is met de “HDMI-kabel met hoge snelheid” of de “HDMI-kabel met hoge snelheid en ethernet” bij het aansluiten van een apparaat met ondersteuning voor Deep Colorsignaaloverdracht. Dit toestel heeft ondersteuning voor de volgende HDMI-functies: nnOver de 3D-functie OPMERKING • Raadpleeg de instructies in de handleiding van uw weergaveapparaat samen met deze handleiding wanneer u 3D-video afspeelt.
Een HDMI-incompatibel toestel aansluiten Zo wijzigt u de bron die aan aansluitingen is toegewezen Dit toestel kan de bron wijzigen die is toegewezen aan de DIGITAL AUDIO IN en COMPONENT VIDEO IN-aansluitingen. Videokabel (apart verkrijgbaar) Component videokabel Videokabel vblz. 13 Audiokabel (apart verkrijgbaar) vblz. 14 Coaxiale digitale kabel vblz. 15 vblz. 16 vblz. 17 vblz. 18 Optische kabel Audiokabel L L R R vblz. 19 vblz. 20 vblz. 21 vblz.
Een HDMI-incompatibel toestel aansluiten Instelling ingangsaansluiting Wanneer u de volgende aansluiting maakt, moet u de instellingen voor de ingangsaansluiting wijzigen. • Dit gedeelte beschrijft hoe u een aansluiting kunt maken wanneer uw TV geen HDMI-aansluitingen ondersteunt. Ga naar “Een HDMI-compatibel toestel aansluiten” (vblz. 7) voor instructies over de aansluiting van HDMI.
Een HDMI-incompatibel toestel aansluiten Satelliettuner/kabel-TV AUDIO Dit gedeelte beschrijft hoe u een aansluiting kunt maken wanneer uw satelliettuner of kabel-tv geen HDMIaansluitingen ondersteunt. Ga naar “Een HDMI-compatibel toestel aansluiten” (vblz. 7) voor instructies over de aansluiting van HDMI.
Een HDMI-incompatibel toestel aansluiten Instelling ingangsaansluiting Wanneer u de volgende aansluiting maakt, moet u de instellingen voor de ingangsaansluiting wijzigen. Dit gedeelte beschrijft hoe u een aansluiting kunt maken wanneer uw DVD-speler geen HDMI-aansluitingen ondersteunt. Ga naar “Een HDMI-compatibel toestel aansluiten” (vblz. 7) voor instructies over de aansluiting van HDMI. a DIGITAL AUDIO COAXIAL-aansluiting Wijzig de standaard “CBL/SAT” naar “DVD”.
Een HDMI-incompatibel toestel aansluiten Instelling ingangsaansluiting Wanneer u de volgende aansluiting maakt, moet u de instellingen voor de ingangsaansluiting wijzigen. Dit gedeelte beschrijft hoe u een aansluiting kunt maken wanneer uw Blu-ray Disc-speler geen HDMIaansluitingen ondersteunt. Ga naar “Een HDMI-compatibel toestel aansluiten” (vblz. 7) voor instructies over de aansluiting van HDMI. a DIGITAL AUDIO COAXIAL-aansluiting Wijzig de standaard “CBL/SAT” naar “Blu-ray”.
Een HDMI-incompatibel toestel aansluiten Digitale camcorder VIDEO Dit gedeelte beschrijft hoe u een aansluiting kunt maken wanneer uw digitale camcorder geen HDMIaansluitingen ondersteunt. Ga naar “Een HDMI-compatibel toestel aansluiten” (vblz. 7) voor instructies over de aansluiting van HDMI. COMPONENT VIDEO OUT Y PB PR nnAudio-aansluiting a De volgende methoden zijn beschikbaar voor het aansluiten op dit toestel. Gebruik een van deze methoden om een aansluiting te maken.
Een HDMI-incompatibel toestel aansluiten Een iPod of USB-geheugenapparaat aansluiten op de iPod/USBpoort Basisversie Ondersteunde iPod modellen • iPod classic • U kunt op een iPod of USB-geheugenapparaat opgeslagen muziek afspelen. • Zie “Een iPod afspelen” (vblz. 33) of “Een USB-geheugenapparaat afspelen” (vblz. 36) voor de bedieningsrichtlijnen.
Een HDMI-incompatibel toestel aansluiten CD-speler AUDIO U kunt audio van CD’s afspelen. AUDIO OUT L R nnAudio-aansluiting De volgende methoden zijn beschikbaar voor het aansluiten op dit toestel. Gebruik een van deze methoden om een aansluiting te maken. De nummers die vooraf zijn vastgelegd met aansluitingen, geven de aanbevolen volgorde aan. Hoe lager het nummer, hoe hoger de weergavekwaliteit.
Een HDMI-incompatibel toestel aansluiten Zenderrichting • Sluit de met het toestel meegeleverde FM-antenne aan om radiouitzendingen te beluisteren. • Nadat u de antenne hebt aangesloten en een radiosignaal ontvangt (vblz. 39 “Luisteren naar FM-uitzendingen”), dient u tape te gebruiken om de antenne op de positie met de minste ruis vast te zetten. FMbuitenantenne Basisversie Een FM-antenne aansluiten OPMERKING • Sluit geen twee FM-antennes tegelijk aan.
Een HDMI-incompatibel toestel aansluiten Een draadloze ontvanger aansluiten (RX101) Draadloze ontvanger (RX101) Basisversie • U kunt een draadloze ontvanger (RX101, afzonderlijk verkrijgbaar) aansluiten om met dit toestel muziek af te spelen op uw Bluetooth-apparaat. • Schakel hiervoor de ingangsbron naar “M-XPort” (vblz. 31 “De ingangsbron selecteren”). • Dit toestel ondersteunt de A2DP-standaard van het Bluetooth-profiel.
Aansluiten op een thuisnetwerk (LAN) nnBreedband internetverbinding nnModem • Weergave van netwerkaudio, zoals internetradio en muziekservers • Weergave van muziek van online bronnen • AirPlay • Bewerkingen op dit toestel via het netwerk Wanneer bovendien bijgewerkte firmware beschikbaar is voor het verbeteren van dit toestel, worden de updategegevens door ons naar dit toestel overgedragen via het netwerk. U kunt vervolgens de nieuwste firmware downloaden. Selecteer in het menu “Update” (vblz.
Het netsnoer aansluiten Geavanceerde versie Naar stopcontact (230 V wisselstroom, 50/60 Hz) Basisversie Stop de stekker in het stopcontact nadat u alle aansluitingen hebt voltooid. Netsnoer (meegeleverd) OPMERKING • Steek de stekker van het netsnoer pas in het stopcontact nadat alle verbindingen zijn gemaakt. • Bind netsnoeren en aansluitsnoeren of verschillende aansluitsnoeren niet samen tot een bundel. Dit kan gezoem of ruis veroorzaken.
Instellen nn De luidsprekers instellen (Audyssey® setup) (vblz. 24) nn De netwerkinstellingen maken (Netwerk) (vblz. 30) Weergave (Basisbediening) (vblz. 31) Weergave (Geavanceerde bediening) (vblz. 89) De akoestische eigenschappen van de aangesloten luidsprekers en de luisterruimte worden gemeten en de optimale instellingen worden automatisch gemaakt. Dit wordt “Audyssey® setup” genoemd. Om de meting uit te voeren, zet u de setup-microfoon op meerdere plaatsen in de luisterruimte.
De luidsprekers instellen (Audyssey® setup) Voorbereiding van de bijgeleverde setupmicrofoon 2 Monteer de instellingsmicrofoon op een statief of standaard en installeer deze bij de hoofdluisterpositie. Bij het plaatsen van de setup-microfoon dient u de hoogte van de klankontvanger aan te passen op het niveau van het oor van de luisteraar. Setup-microfoon Als u een subwoofer gebruikt waaraan u de volgende aanpassingen kunt maken, dient u de subwoofer in te stellen zoals hieronder beschreven.
De luidsprekers instellen (Audyssey® setup) 5 • Deze stap controleert de luidsprekerconfiguratie en -opstelling automatisch en berekent het kanaalniveau, de afstand en de crossover frequency. De stap corrigeert ook vervorming in de beluisterzone. “Start” te selecteren en druk daarna op ENTER. Bij het starten van het meten wordt een testtoon via iedere luidspreker uitgestuurd. Audyssey setup Sluit de kalibratiemicrofoon aan op de ingang SETUP MIC aan de voorkant van de AV-Receiver.
De luidsprekers instellen (Audyssey® setup) de setup-microfoon op positie 2, selecteer “Ga 10 Zet verder” en druk vervolgens op ENTER. 11 Herhaal stap 10, meet positie 3 tot 6. Er wordt een “Metingen voltooid.” bericht weergegeven, wanneer de meting van positie 6 is voltooid. Audyssey setup 12 “Cálculo” te selecteren en druk daarna op ENTER. Meetresulaten worden geanalyseerd en de frequentierespons van iedere luidspreker in de luisterkamer wordt bepaald. Audyssey setup Metingen voltooid.
De luidsprekers instellen (Audyssey® setup) Opslaan Gebruik ui om het item dat u 13 wilt controleren te selecteren en druk vervolgens op ENTER. Voltooien de setup-microfoon los van de SETUP MIC14 “Opslaan” te selecteren en druk daarna op ENTER. 15 Koppel aansluiting van het toestel. ® 16 Stel Audyssey Dynamic Volume in. Bewaar de meetresultaten. Audyssey setup Audyssey setup U kunt Dynamic Volume-functie instellen, wat automatisch het volumeniveau voor alle waarden aanpast. Luidspr. config.
De luidsprekers instellen (Audyssey® setup) OPMERKING • Er wordt een foutmelding weergegeven als Audyssey® setup niet kan worden voltooid door de plaatsing van de luidsprekers, de meetomgeving, enz. Als een foutmelding wordt weergegeven, moet u de relevante items controleren en de nodige metingen uitvoeren. Voer daarna de Audyssey® setup opnieuw uit.
De luidsprekers instellen (Audyssey® setup) Hiermee kunt u de meetresultaten en equalizer-eigenschappen controleren na de Audyssey® setup. 1 Dit toestel kan worden verbonden met een thuisnetwerk (LAN) voor het beluisteren van internetradio of weergave van muziekbestanden en fotobestanden (JPEG) die op een computer zijn opgeslagen. Gebruik ui om “Parameter check” te selecteren en druk vervolgens op ENTER.
Weergave (Basisbediening) Basisversie Belangrijke informatie Instellen (vblz. 24) nn Blu-ray Disc-speler / DVD speler afspelen (vblz. 32) nn Een CD-speler laten spelen (vblz. 32) nn Een iPod afspelen (vblz. 33) nn Een USB-geheugenapparaat afspelen (vblz. 36) nn Luisteren naar FM-uitzendingen (vblz. 39) Een luistermodus selecteren (Geluidsmodus) (vblz. 69) Weergave (Geavanceerde bediening) (vblz.
Belangrijke informatie Gebruik VOLUME df om het volume in te stellen. • De methode voor het tonen van het volumedisplay is verschillend afhankelijk van de “Schaal” instelling (vblz. 106). GAfstellingsbereikH 0.0 0.5 – 98.0 nn Als de “Schaal”-instelling (vblz. 106) is “–79.5dB – 18.0dB” -79.5dB – 18.0dB GAfstellingsbereikH – – –.– • Het variabele bereik hangt af van de signaalbron en kanaalniveauinstelling. 1 Op afspelen voorbereide. q Zet de TV en subwoofer en speler aan.
Een iPod afspelen Luisteren naar muziek op een iPod de bij de iPod geleverde 1 Gebruik USB-kabel om de iPod met de iPod/USB-poort te verbinden (vblz. 18). op “iPod/USB”. “Remote iPod” wordt weergegeven op de display van het toestel. • Er wordt niets weergegeven op het TV-scherm. iPod zelf direct bedienen terwijl u het iPod4 Descherm ziet om muziek af te spelen. nnMuziek die is opgeslagen op de iPhone, iPod touch of iPad wordt direct naar het apparaat gestreamd (vblz.
Een iPod afspelen In deze modus worden verschillende lijsten en schermen tijdens de weergave op de iPod, weergegeven op het TV-scherm. Dit gedeelte beschrijft de stappen tot het afspelen van tracks op de iPod in de “Afstandsbediening”. • Er worden Engelse letters, cijfers en bepaalde symbolen weergegeven. Incompatibele tekens worden als “.” (punt). • De bewerkingen die beschikbaar zijn voor “Directe modus” en “Afstandsbediening” worden hieronder weergegeven.
Een iPod afspelen nnWillekeurig afspelen (Random) Druk op OPTION terwijl u in de 1 Afstandsbedieningsmodus bent. 1 Het scherm met het optiemenu wordt weergegeven. 2 Gebruik ui om “Herhalen” te selecteren en druk vervolgens op ENTER. Het scherm met het optiemenu wordt weergegeven. ui om “Random” te selecteren en druk 2 Gebruik vervolgens op ENTER.
Een USB-geheugenapparaat afspelen Basisversie Muziek- of fotobestanden (JPEG) weergeven op een USB-geheugenapparaat. Belangrijke informatie GCompatibele indelingenH GOndersteunde bestandstypenH Ondersteunde bestandstypen USB-geheugenapparaten z1 WMA (Windows Media Audio) Pz2 MP3 (MPEG-1 Audio Layer-3) P WAV P MPEG-4 AAC Pz3 FLAC (Free Lossless Audio Codec) P JPEG P Bitsnelheid Extensie 32/44,1/48 kHz 48 – 192 kbps .wma MP3 (MPEG-1 Audio Layer-3) 32/44,1/48 kHz 32 – 320 kbps .
Een USB-geheugenapparaat afspelen 1 Druk op iPod/USB om de 2 ingangsbron over te schakelen op Sluit het USB-geheugenapparaat aan op de iPod/ USB-poort (vblz. 18). USB Geef deze instelling op onder “M-DAX” (vblz. 106) in het menu. U kunt de functie “M-DAX” herstellen naar een status die nauw aanleunt bij de audio vóór de compressie, terwijl het gevoel van lage tonen wordt gecorrigeerd zodat u kunt genieten van een rijkere weergave-ervaring. De standaard instelling is “Uit”.
Een USB-geheugenapparaat afspelen Bedieningstoetsen CH/PAGE df INFO uio p Functie Pagina zoeken Weergave van informatie, zoals de bronnaam, het volume en de naam van de geluidsmodus Zoeken tekst / Herhaald afspelen / Willekeurig afspelen / Afbeeldingweergave / Diashow Bediening van de cursor / Automatisch zoeken (cue, ui) ENTER (Indrukken en loslaten) ENTER (Ingedrukt houden) BACK SETUP 8 9 1/3 Geavanceerde versie OPTION Basisversie nnBedieningstoetsen USB-geheugenapparaat Invoeren Stop DVD Inform
Luisteren naar FM-uitzendingen Luisteren naar FM-uitzendingen Afstemmen Druk op TUNER om de 1 ingangsbron over te schakelen naar “FM”. GTV-schermH FM STEREO AUTO Now Playing CH 1 Druk op de knop OPTION om een menu met de functies die kunnen worden gebruikt weer te geven op het TV-scherm. Selecteer in dit menu de functie die u wilt gebruiken. U kunt de gewenste functie gemakkelijk zoeken en gebruiken. nn Afstemmen door de radiofrequentie in te voeren (Direct afstemmen) (vblz. 41) FM 87.
Luisteren naar FM-uitzendingen U kunt de modus voor het afstemmen op FM-zenders wijzigen. Als u niet automatisch kunt afstemmen met de modus “Auto”, wijzigt u de modus naar “Handmatig” en stemt u handmatig af. o p om de afstemmodus te selecteren en 4 Gebruik druk dan op ENTER. GTV-schermH Druk op TUNER om de 1 ingangsbron over te schakelen FM STEREO naar “FM”. Het scherm met het optiemenu wordt weergegeven. 3 TUNE+/- Gebruik ui om “Afstemmodus” te selecteren en druk vervolgens op ENTER.
Luisteren naar FM-uitzendingen U kunt de ontvangende frequentie invoeren om er direct op af te stemmen. Het scherm met het optiemenu wordt weergegeven. vervolgens op ENTER. FM STEREO GTV-schermH AUTO Now Playing FM ---.-MHz DIRECT TUNE Invoer Het scherm voor het direct afstemmen wordt weergegeven en “–” knippert op het display. FM Het scherm waarin u de frequentie kunt invoeren, wordt weergegeven.
Luisteren naar FM-uitzendingen nnAfstemmen op radiozenders en automatisch voorkeuzezenders instellen (Auto voorkeuzegeheugen) op TUNER om de ingangsbron over te schakelen 1 Druk naar “FM”. 2 Druk op OPTION. ui om “Auto voorkeuzegeheugen” te 3 Gebruik selecteren en druk vervolgens op ENTER. Het scherm met het optiemenu wordt weergegeven. GTV-schermH FM STEREO GTV-schermH FM STEREO CH 1 TUNE+/- Auto voorkeuzegeheugen FM 87.
Luisteren naar FM-uitzendingen Uw favoriete radiozenders kunnen in het voorkeuzegeheugen worden opgeslagen om het afstemmen op deze zenders te vereenvoudigen. Er kunnen maximaal 56 voorkeuzezenders worden opgeslagen. Het huidige zendstation dat als voorkeuzezender is ingesteld. GTV-schermH 25 – 32 FM Voorkeuzegeheugen 1 STEREO FM 89.10MHz FM98.10MHz 87.50MHz FM 5 FM 90.10MHz 6 7 8 Tune STEREO FM 87.50MHz 3 4 FM 90.10MHz FM 90.
Luisteren naar FM-uitzendingen U kunt de naam voor de voorkeuzezender instellen of wijzigen. De mag maximaal acht tekens lang zijn. Het scherm met het optiemenu wordt weergegeven. op ENTER. Het scherm waarin u de naam van de voorkeuzezender kunt bewerken, wordt weergegeven. • Telkens wanneer u op o p drukt, wijzigt de instelling conform de onderstaande illustratie. 1–8 9 – 16 49 – 56 Name STEREO AUTO TUNE+/- 1 2 3 4 5 6 7 8 Tune STEREO Now Playing 1-8 FM FM FM FM FM FM FM FM 87.50MHz FM 87.
Luisteren naar FM-uitzendingen U kunt vooraf de zenders instellen die u niet wilt zien bij het u afstemmen, op groepen of op zenders. De instelling voor het overslaan van de voorkeuzezenders is nuttig bij het afstemmen, omdat alleen uw favoriete zenders worden weergegeven. Het scherm met het optiemenu wordt weergegeven. Het scherm Preset Skip wordt weergegeven. q Gebruik o p om de groep zenders die u wilt overslaan, te selecteren.
Luisteren naar FM-uitzendingen 1 Gebruik o p terwijl het scherm Preset Skip wordt weergegeven om een groep te selecteren die een zender bevat waarvoor het overslaan moet worden geannuleerd. GTV-schermH FM Voorkeuze oversl. Stel 1-8 in op “overslaan” Voorkeuzegroep 1-8 CH 1 TUNE+/- 1 2 3 4 5 6 7 8 Tune STEREO AUTO Now Playing FM FM FM FM FM FM FM FM 87.50MHz Aan FM 87.50MHz 89.10MHz Aan 98.10MHz Aan 108.00MHz Aan 90.10MHz Aan 90.10MHz Aan 90.10MHz Aan 90.
Luisteren naar FM-uitzendingen Gebruik deze functie om RDS-zenders te zoeken die een bepaald programmatype (PTY) uitzenden PTY geeft het RDS-programmatype aan.
Luisteren naar FM-uitzendingen TP geeft programma´s aan die verkeersinformatie uitzenden. Hiermee kunt u snel de verkeersomstandigheden bij u in de buurt controleren voordat u van huis gaat. Gebruik deze functie om RDS-zenders te vinden die verkeersinformatie (TP-zenders) uitzenden. Het TP-zoeken begint automatisch. GTV-schermH FM STEREO TP-zoekfunctie CH 1 CH 1 FM 87.50MHz FM 87.50MHz - PS NAME - AUTO Now Playing Zoeken Het scherm met het optiemenu wordt weergegeven.
Luisteren naar FM-uitzendingen Met RT kan de RDS-zender tekstberichten uitzenden die op de display kunnen worden getoond. Wanneer radiotekst wordt ontvangen, verschijnt “Radio Text” op de display. GTV-schermH CH 1 FM 87.50MHz FM 87.50MHz - PS NAME - Optie STEREO AUTO Direct afstemmen Now Playing RDS-zoekfunctie PPTY-zoekfunctie FM 87.
Netwerkinhoud Internetradio verwijst naar radioprogramma’s die via internet worden uitgezonden. Er kan worden afgestemd op internetradiozenders van over de gehele wereld. 1 Op afspelen voorbereide. q Controleer de netwerkomgeving en zet dit toestel aan (vblz. 22 “Aansluiten op een thuisnetwerk (LAN)”). w Indien instellingen nodig zijn, dan geeft u deze op in “Instellingen” (vblz. 124). Dit zijn de zendertypen en -specificaties die door dit toestel worden ondersteund voor weergave.
Luisteren naar internetradio Geef deze instelling op onder “M-DAX” (vblz. 106) in het menu. U kunt de functie “M-DAX” herstellen naar een status die nauw aanleunt bij de audio vóór de compressie, terwijl het gevoel van lage tonen wordt gecorrigeerd zodat u kunt genieten van een rijkere weergave-ervaring. De standaard instelling is “Uit”. nnDe schermweergave schakelen nnTerugkeren naar het vorige scherm Druk op o of BACK.
Luisteren naar internetradio het MAC-adres van dit toestel 1 Controleer (vblz. 123). 7 Het scherm waarin u een favoriete groep kunt maken, wordt weergegeven. de naam van de favoriete groep in en klik dan 8 Voer op “Go”. Er wordt een nieuwe favoriete groep gemaakt die de geselecteerde radiozender bevat. • Internetradiozenders die aan favorieten zijn toegevoegd in vTuner, kunnen met dit toestel worden afgespeeld vanaf “radiomarantz. com” (vblz. 50).
Bestanden die op een PC en NAS zijn opgeslagen, afspelen Basisversie Dit toestel kan muziekbestanden en afspeellijsten (m3u, wpl) die zijn opgeslagen op een PC en op een NAS (Network Attached Storage) die DLNA ondersteunt, weergeven. Belangrijke informatie • De functie voor weergave van netwerkaudio van dit toestel maakt een verbinding met de server met de hieronder weergegeven technologieën.
Bestanden die op een PC en NAS zijn opgeslagen, afspelen Hier passen we de instellingen toe om muziekbestanden die op een PC en NAS op het netwerk zijn opgeslagen, te delen. nnMedia die op de PC zijn opgeslagen, delen Als u een mediaserver gebruikt, moet u deze instelling eerst toepassen. Wanneer u Windows Media Player 12 (Windows 7) gebruikt OPMERKING Voer deze procedure uit nadat u het beeldscherm in het Configuratiescherm hebt gewijzigd naar “Categorie”. en delen selecteren”.
Bestanden die op een PC en NAS zijn opgeslagen, afspelen Volg deze procedure voor het weergeven van muziekbestanden, beeldbestanden of afspeellijsten. 1 Op afspelen voorbereide. 2 Druk op NETWORK. Gebruik de uio p om “Media 3 Server” te selecteren, en druk Geef deze instelling op onder “M-DAX” (vblz. 106) in het menu.
Bestanden die op een PC en NAS zijn opgeslagen, afspelen Druk op de knop OPTION om een menu met de functies die kunnen worden gebruikt weer te geven op het TV-scherm. Selecteer in dit menu de functie die u wilt gebruiken. U kunt de gewenste functie gemakkelijk zoeken en gebruiken. nn Herhaald afspelen (Herhalen) (vblz. 64) nn Willekeurig afspelen (Random) (vblz. 64) nn Favorieten toevoegen vanaf het optiemenu (Favorietengeheugen) (vblz. 65) nn Afbeeldingen achtereenvolgens weergeven (Diashow) (vblz.
Online services gebruiken nnOver Last.fm (vblz. 58) nnOver Flickr (vblz. 61) Flickr is een onlinedienst die in 2004 werd opgestart waarop foto's worden gedeeld. U kunt dit toestel gebruiken om foto's te bekijken die openbaar werden gemaakt door Flickr-gebruikers. U hebt geen account nodig om Flickr te gebruiken. Om foto's te bekijken die u zelf hebt genomen, hebt u een account nodig om deze foto's op de Flickr-server op te laden. Zie de Flickr-homepagina voor meer details. http://www.flickr.
Online services gebruiken Last.fm-radio is niet in alle landen beschikbaar. Bekijk http://www. last.fm/hardware voor meer informatie. U hebt ook een abonnement nodig. Koop er vandaag één bij http://www.last.fm/subscribe. 1 u de gebruikersnaam en het wachtwoord hebt u een Last.fm-account hebt, drukt u op ui om 4 Als 6 Nadat ingevoerd, drukt u op “OK” en daarna op ENTER. “Ik heb een Last.fm-account” te selecteren. Druk daarna op ENTER of p. Last.fm Account Op afspelen voorbereide.
Online services gebruiken Menu [1/3] Love this track nnDe geluidskwaliteit aanpassen (M-DAX) Geef deze instelling op onder “M-DAX” (vblz. 106) in het menu. U kunt de functie “M-DAX” herstellen naar een status die nauw aanleunt bij de audio vóór de compressie, terwijl het gevoel van lage tonen wordt gecorrigeerd zodat u kunt genieten van een rijkere weergave-ervaring. De standaard instelling is “Uit”.
Online services gebruiken Bedieningstoetsen CH/PAGE df INFO uio p Basisversie nnLast.
Online services gebruiken U kunt foto’s bekijken die door bepaalde gebruikers worden gedeeld, of alle foto’s bekijken die op Flickr worden gedeeld. 4 Gebruik de ui om “Add Flickr Contact” te selecteren en druk dan op de ENTER of p. Flickr nnFoto’s bekijken die door bepaalde gebruikers worden gedeeld [1/2] Add Flickr Contact ENTER. OPTION Optie in “Contact” de gewenste schermnaam 5 Voeg (gebruikersnaam die u wilt weergeven) toe. • Ga naar blz. 102 voor het invoeren van tekens.
Online services gebruiken de ui om “All Content” te selecteren en 1 Gebruik druk dan op de ENTER of p. Flickr nnFlickr-bedieningstoetsen Bedieningstoetsen CH/PAGE df INFO [1/2] OPTION Add Flickr Contact All Content uio p 2 Optie Gebruik ui om de map te selecteren en druk daarna op ENTER of p. Interestingness Toont foto’s die populair zijn door het aantal gebruikerscommentaren of het aantal keer dat ze als favoriet zijn toegevoegd. Search by text Toont de meest recent toegevoegde foto’s.
Handige functies Inhoud zoeken met trefwoorden (Zoeken tekst) USB nn Inhoud zoeken met trefwoorden (Zoeken tekst) (vblz. 63) nn Willekeurig afspelen (Random) (vblz. 64) Media Server 1 ui om “Zoeken tekst” te selecteren en 2 Gebruik druk vervolgens op ENTER. Druk op OPTION terwijl inhoud wordt afgespeeld. Gebruik ui om de weer te geven inhoud te selecteren en druk vervolgens op ENTER of p. Afspelen begint. Het scherm met het optiemenu wordt weergegeven. Het toetsenbordinvoerscherm wordt weergegeven.
Handige functies Media Server USB Willekeurig afspelen (Random) Media Server USB 1 Druk op OPTION terwijl inhoud wordt afgespeeld. 1 Druk op OPTION terwijl inhoud wordt afgespeeld. Gebruik ui “Herhalen” te selecteren en druk ui om “Random” te selecteren en druk 2 vervolgens 2 Gebruik op ENTER. vervolgens op ENTER. Het scherm met het optiemenu wordt weergegeven.
Handige functies Er zijn twee manieren om inhoud toe te voegen aan favorieten: q Favorieten toevoegen vanaf het optiemenu w Toevoegen aan de toets FAVORITE STATION nnFavorieten toevoegen vanaf het optiemenu (Favorietengeheugen) 1 ui om “Favorietengeheugen” te selecteren 2 enGebruik druk vervolgens op ENTER. Druk op OPTION terwijl inhoud wordt afgespeeld. 1 Druk op NETWORK. Gebruik de uio p om 2 “Favorites” te selecteren, en druk dan op ENTER.
Handige functies dan op ENTER. Internet Radio Media Server U kunt afbeeldingsbestanden (JPEG) die zijn opgeslagen op een USB-geheugenapparaat of mediaserver en afbeeldingen op een Flickr-website weergeven als een diavoorstelling. U kunt ook de weergaveduur instellen. 1 Een afbeelding weergeven (vblz. 61). Geef een beeld weer en druk op OPTION. muziekbestand of internetradiozender 1 2 Een weergeven (vblz. 50, 55). Gebruik ui om “Diashow” te selecteren en druk Druk op OPTION. 2 vervolgens op ENTER.
AirPlay-functie zzGratis downloadbaar via the App Store. nniTunes-muziek afspelen met dit toestel Selecteren van meerdere luidsprekers (apparaten) iTunes 10 of latere versie op de Mac of 1 Installeer Windows PC die met het zelfde netwerk als voor dit U kunt nummers van iTunes met andere AirPlay compatibele luidsprekers (apparaten) dan de luidsprekers van dit toestel weergeven. toestel is verbonden. Update uw “iPhone/iPod touch/iPad” naar iOS 4.2.1.
AirPlay-functie U kunt de iTunes weergave met de afstandsbediening van dit toestel starten, pauzeren en automatisch zoeken uitvoeren. “OK”. Apparaten Algemeen Afspelen Delen Store Toezicht verschijnt op het menuscherm terwijl AirPlay wordt bediend. • De ingangsbron wordt overgeschakeld naar “NETWORK” wanneer het afspelen van AirPlay wordt gestart. • U kunt het afspelen van AirPlay stoppen door op de knop o te drukken of door een andere ingangsbron te kiezen.
Een luistermodus selecteren (Geluidsmodus) Dit toestel genereert automatisch een lijst van alle afspeelbare geluidsmodi op basis van de ingevoerde audio-indeling en de huidige configuratie van de luidsprekerinstelling, en toont de lijst op het scherm. Hierdoor kunt u een correcte surroundweergavemodus selecteren, zelfs als u de selectie van de geluidsmodus niet goed onder de knie hebt. Probeer verschillende surroundweergavemodi en geniet van surroundweergave in uw favoriete modus.
Een luistermodus selecteren Deze modus detecteert het type digitaal ingangssignaal en selecteert automatisch de overeenkomende modus voor weergave. De auto surround-weergave start. luisteren.
Een luistermodus selecteren Ingangssignaal Luistermodus Luistermodus STEREO AUTO z2 DOLBY PLgx Game z3 2-kanaals z1 DOLBY PLg Game z3 DOLBY PLgz Height z3 MULTI CH STEREO VIRTUAL Meerkanaals STEREO z4 AUTO z2 DOLBY DIGITAL DOLBY DIGITAL EX Dolby Digital DOLBY DIGITAL + PLgz DOLBY TrueHD Dolby TrueHD DOLBY TrueHD + EX DOLBY TrueHD + PLgz DOLBY DIGITAL Plus Dolby Digital DOLBY DIGITAL Plus + EX Plus DOLBY DIGITAL Plus + PLgz DTS SURROUND DTS ES DSCRT 6.1 DTS ES MTRX 6.
Een luistermodus selecteren Dolby luistermodus DTS luistermodus Type luistermodus DOLBY PLgxz1 DOLBY Pro Logic DOLBY PLgzz2 DOLBY DIGITAL EXz1 DOLBY TrueHD DOLBY DIGITAL Plus DTS SURROUND DTS ES DSCRT6.1z DTS ES MTRX6.1z DTS 96/24 DTS-HD DTS Express Beschrijving Deze modus kan worden gekozen bij gebruik van een DTS NEO:6 decoder voor weergave van een 2-kanaal bron met 6.1/7.1-kanaal surroundgeluid inclusief het surroundachterkanaal.
Een luistermodus selecteren Directe luistermodus Type luistermodus MULTI CH STEREO VIRTUAL Type luistermodus DIRECT PURE DIRECT STEREO luistermodus Type luistermodus STEREO Beschrijving Informatie Dit is de modus voor weergave in stereo. De toon kan worden aangepast. • Het geluid wordt weergegeven met de Luidsprekers vóór links en rechts en met de subwoofer. • Ingangssignalen voor meerkanaals worden gemixt tot 2-kanaals audio en zo afgespeeld.
Geavanceerde versie Hier beschrijven we de functies en handelingen waarmee u het toestel beter kunt gebruiken. F Aansluitingen (Geavanceerde aansluiting) vblz. 88 F Weergave (Geavanceerde bediening) vblz. 89 Geavanceerde versie F Installatie/aansluiting/Instelling van luidsprekers (Geavanceerd) vblz. 75 Basisversie Geavanceerde versie F Weergave in ZONE2 (aparte kamer) vblz. 96 DVD 74 Informatie F Gedetailleerde instellingen maken vblz.
Installatie/aansluiting/Instelling van luidsprekers (Geavanceerd) Installatie luidsprekers Wanneer 7.1-kanaals luidsprekers zijn geïnstalleerd met surround achter luidsprekers FL De luidsprekers instellen (vblz. 86) Front height luidspreker • Iets omlaag richten Minstens z 1m FR SW Gebruik de onderstaande afbeelding als richtlijn voor de hoogte waarop elke luidspreker moet worden geïnstalleerd. De hoogte hoeft niet exact dezelfde te zijn. Geavanceerde versie Luidsprekeraansluiting (vblz.
Installatie luidsprekers FHL Indien 6.1-kanaal luidsprekers zijn geplaatst FL FHR FL FR SW FR FL SW Indien 5.
Luidsprekeraansluiting De luidsprekerkabels aansluiten Controleer de kanalen links (L) en rechts (R) en de polariteiten + (rood) en – (zwart) op de luidsprekers die op dit toestel worden aangesloten, en zorg dat u de kanalen en polariteiten correct onderling aansluit. nn 7.1-kanaals luidsprekers aansluiten met luidsprekers surround achter (vblz. 78) nn Verbinden van 7.1-kanaal luidsprekers met gebruik van Voorluidsprekers hoog (vblz. 79) nn Verbinden van 6.
Luidsprekeraansluiting Basisversie 7.1-kanaals luidsprekers aansluiten met luidsprekers surround achter Geavanceerde versie De afbeelding rechts laat een voorbeeld zien van aansluiting voor 7.1-kanaalsweergave met surround achterluidsprekers. Wanneer u de surround achterluidsprekers en Voorluidsprekers hoog aansluit voor de weergave start, wordt audio afgespeeld door de luidsprekers automatisch te laten omschakelen volgens de geluidsmodus of ingangssignalen. Voor 7.
Luidsprekeraansluiting Basisversie Verbinden van 7.1-kanaal luidsprekers met gebruik van Voorluidsprekers hoog Geavanceerde versie De afbeelding rechts laat een voorbeeld zien van aansluiting voor 7.1-kanaalsweergave met Voorluidsprekers hoog. Wanneer u de surround achterluidsprekers en Voorluidsprekers hoog aansluit voor de weergave start, wordt audio afgespeeld door de luidsprekers automatisch te laten omschakelen volgens de geluidsmodus of ingangssignalen. Voor 7.
Luidsprekeraansluiting Basisversie Verbinden van 6.1-kanaal luidsprekers met gebruik van een surround-achter luidspreker Geavanceerde versie Indien u slechts één surround-achter luidspreker gebruikt, verbindt dan met de “L”-kant van de SURROUND BACK-aansluiting. Ga voor de luidsprekerinstellingen in dit geval naar “Indien 6.1-kanaal luidsprekers zijn geplaatst” (vblz. 76). Voor 6.
Luidsprekeraansluiting Basisversie Verbinden van 5.1-kanaal luidsprekers Voor 5.1-kanaals weergave moet u “Toewijsmodus” instellen op “Surround Back” in de stappen 3 tot 5 voor ““Verst. Toewijzen” instellen” (vblz. 86). Kabels die voor aansluitingen worden gebruikt Audiokabel (apart verkrijgbaar) Geavanceerde versie Luidsprekerkabel Subwoofer Kabel OPMERKING • Zie blz. 77 voor de aansluitingen van de luidsprekerkabel. • Zie voor luidsprekerimpedantie blz. 77.
Luidsprekeraansluiting Basisversie Verbinden van voor A/B-luidsprekers U kunt een tweede set luidsprekers aansluiten op dit toestel en gebruiken voor weergave. Stel in dit geval “Toewijsmodus” op “Front B” in stap 3 tot 5 van ““Verst. Toewijzen” instellen” (vblz. 86).
Luidsprekeraansluiting Basisversie Verbinden van 2.1-kanaal luidsprekers Kabels die voor aansluitingen worden gebruikt Audiokabel (apart verkrijgbaar) Luidsprekerkabel Geavanceerde versie Subwooferkabel OPMERKING • Zie blz. 77 voor de aansluitingen van de luidsprekerkabel. • Zie voor luidsprekerimpedantie blz. 77.
Luidsprekeraansluiting Basisversie Verbinden van voorluidsprekers met een bi-amp aansluiting Geavanceerde versie • U kunt geen luidsprekers surround achter gebruiken in een bi-amp-aansluiting. Gebruik voorluidsprekers die een bi-amp-aansluiting ondersteunen en sluit de luidsprekers aan op de FRONT-luidsprekeraansluitingen en de SURROUND BACK-luidsprekeraansluitingen. Stel in dit geval “Toewijsmodus” op “Bi-AMP” in stap 3 tot 5 van ““Verst. Toewijzen” instellen” (vblz. 86).
Luidsprekeraansluiting Basisversie Een voorluidspreker die een vermogensversterker gebruikt, aansluiten Dit toestel ondersteunt de aansluiting van een voorluidspreker die een vermogensversterker gebruikt om de uitvoer te verhogen. Sluit een afzonderlijk verkrijgbare vermogensversterker aan op de PRE OUT (FL/ FR) aansluiting van dit toestel.
De luidsprekers instellen rondom-items geven de instellingen aan. Voordat de Audyssey® setup-metingen worden uitgevoerd, kunnen de onderstaande instellingen worden gemaakt. • De toewijzing van de versterker wijzigen (Verst. Toewijzen) Het signaal dat via de SURROUND BACK-luidsprekeraansluiting van dit toestel wordt uitgestuurd, kan gewisseld worden zodat het overeenstemt met uw luidsprekeromgeving (vblz. 86 ““Verst. Toewijzen” instellen”).
De luidsprekers instellen 7 te selecteren en druk vervolgens op ENTER. “Kanaalselectie” instellen Gebruik ui om “Kanaalselectie” te selecteren en druk vervolgens op ENTER. Instelling voor toewijzing van de in het toestel ingebouwde eindversterker aan ZONE2 en het geluid stereo te reproduceren. Bi-AMP Instelling voor gebruik van de voorluidsprekers via de bi-amp-aansluiting. Front B Instelling voor gebruik van de tweede set voorluidsprekers voor weergave. Front Height Instelling voor 7.
Aansluitingen (Geavanceerde aansluiting) Basisversie De REMOTE CONTROL-aansluitingen verbinden marantz-apparaten op afstand verbinden • U kunt een IR-ontvanger aansluiten op dit toestel om bewerkingen uit te voeren op dit toestel en externe apparaten met de bijgeleverde afstandsbediening. • Schakel hiervoor de functie voor het ontvangen van het afstandsbedieningssignaal uit (vblz. 94 “Functie Remote lock”).
Weergave (Geavanceerde bediening) Basisversie HDMI-besturingsfunctie Instellen (vblz. 24) Een luistermodus selecteren (Geluidsmodus) (vblz. 69) nnMogelijke bedieningen met HDMI-besturing Aansluitingen (Geavanceerde aansluiting) (vblz. 88) • Verbind de TV optisch-digitaal of analoog (vblz. 8) voor weergave van het geluid van een TV die niet voor de ARC-functie geschikt is via dit toestel. • Voor gebruik van de pass-through functie, moet het verbonden HDMI-apparaat compatibel met HDMI-besturing zijn.
HDMI-besturingsfunctie op MAIN om de zonemodus over te schakelen 1 opDrukMAIN ZONE. MAIN-lampjes. op SLEEP en geef de tijd 2 Druk weer die u wilt instellen. De op. indicator op de display licht • Door iedere druk op SLEEP verandert de tijd als hieronder aangegeven. Off 10 min 20 30 40 50 120 110 100 90 80 70 60 Druk op SLEEP. “Sleep : zmin” verschijnt op het display. zz Afteltijd De slaaptimer annuleren Druk op SLEEP voor het instellen van “Off”. De indicator op het display dooft.
Webregelfunctie het IP-adres van dit toestel in het adresvenster 4 Voer 6 Uitvoeren. van de browser in. Basisversie U kunt dit toestel bedienen vanaf een webregelscherm op een webbrowser. GVoorbeeld 1H MAIN ZONE besturingsscherm 1 het IP-adres van dit toestel 2 Controleer “Informatie” op het menu (vblz. 123). File http://192.168.100.19/index.
Webregelfunctie AUDIO VIDEO INPUTS SPEAKERS NETWORK USER ACCOUNT GENERAL Q9 W0 ON Auto Lip Sync AVR HDMI Audio Out ON HDMI Control ***** Standby Source Power Off Control ***** Analog Auto 16:9 Top Internet Radio TV RELOAD W0 OFF 480p/576p 4:3 1080i 720p 1080p 8 1/3 2 9 W5 40.0 OFF INFO. DISPLAY On-Screen Info ON OFF AUDIO DISPLAY Audio 10sec 30sec OFF Always TV FORMAT NTSC PAL W3 Klik om terug te keren naar het vorige scherm. W4 Klik op de inhoud die u wilt gebruiken.
Functie Dual backup memory Functie Panel lock Om het per ongeluk bedienen van dit toestel te verhinderen, kunt u de werking van de toetsen op het voorpaneel uitschakelen. INTERNET RADIO X ON/STANDBY STATUS VOLUME ZONE2 SOURCE Geavanceerde versie M-DAX DISPLAY ZONE2 SOURCE INTERNET RADIO DISPLAY nnInstellingsdetails onthouden (back-up). nnAlle toetsbewerkingen uitschakelen Stel het toestel in de status die u wilt onthouden en houd INTERNET RADIO en ZONE2 SOURCE minstens 3 seconden ingedrukt.
Functie Panel lock Functie Remote lock • Wanneer u geen IR-ontvanger aansluit, schakelt u de functie Remote lock uit. Wanneer de functie is ingeschakeld, kunt u geen bewerkingen uitvoeren met de afstandsbediening. • Deze functie is standaard uitgeschakeld. INTERNET RADIO X ON/STANDBY STATUS De functie Panel lock wordt geannuleerd. Zelfs wanneer de functie Panel lock is ingesteld, kunt u het toestel bedienen met de afstandsbediening.
Verschillende geheugenfuncties Basisversie Personal Memory Plus-functie Met deze functie stelt u de laatst geselecteerde instellingen (ingangsmodus, geluidsmodus, HDMIuitgangsmodus, MultEQ®, Dynamic EQ, audiovertraging, enz.) in voor de individuele ingangsbronnen. De surroundparameters, tooninstellingen en het volume van de verschillende luidsprekers worden opgeslagen voor de individuele geluidsmodi.
Weergave in ZONE2 (aparte kamer) Het volume instellen Gebruik VOLUME df om het volume in te stellen. ZONE2-lampjes. • Stel de instelling “Toewijsmodus” (vblz. 119) in op “ZONE2” en voer ZONE2-audio uit vanaf de SURROUND BACKluidsprekeraansluitingen (de standaardinstelling is “ZONE2”). • Als u de instelling “Toewijsmodus” (vblz. 119) instelt op “ZONE2”, kan het thuisbioscoopsysteem van de hoofdzone tot 5.1-kanaals weergeven. Zelfs als u audio die is opgenomen door 6.1- of 7.
Slaaptimerfunctie Basisversie • Dit is handig voor het kijken en luisteren voordat u gaat slapen in ZONE2. • De slaaptimerfunctie kan per zone worden ingesteld. Druk op ZONE2 om de zonemodus 1 over te schakelen op ZONE2. ZONE2-lampjes. Geavanceerde versie Druk op SLEEP en geef de tijd weer die u wilt 2 instellen. • Door iedere druk op SLEEP verandert de tijd als hieronder aangegeven.
Gedetailleerde instellingen maken Basisversie Overzicht van het menu Voor de bediening van het menu sluit u een TV aan op het toestel waardoor u het menu kunt weergeven op de TV. Op de volgende pagina’s vindt u de bediening van het menu. Standaard zijn aanbevolen instellingen gedefinieerd voor dit toestel. U kunt dit toestel aanpassen op basis van uw bestaand systeem en uw voorkeursinstellingen.
Overzicht van het menu Gedetailleerde items Algemeen Beschrijving Blz. 127 127 127 127 Geavanceerde versie 128 128 129 Informatie Stel de menutaal voor weergave op het TVscherm in. ZONE2 setup Stel de instellingen in voor het afspelen van audio in het ZONE2 systeem. Zone herbenoemen Verander de schermtitel van iedere zone in een titel van uw voorkeur.
Voorbeelden van menuschermen GVoorbeeld 2H Het scherm Audyssey® setup (met afbeelding) GVoorbeeld 1H Menuselectiescherm (hoofdmenu) Setupmenu i Audio q e o Video Sluit de luidsprekers aan en plaats ze volgens de aanbevelingen in de handleiding. Stel de volgende items indien nodig in. r Luidsprekers Netwerk Algemeen Verst.
Voorbeelden van display’s op het scherm en voorpaneel Menudisplay Bovenste menuweergave Display op het voorpaneel w Video Inputs Luidsprekers Audio Netwerk w Algemeen Setup assistent Weergave bij het veranderen van instellingen [1/2] Ingangen/Ingang toewijzen Standaard HDMI DIGITAL q COMP CBL/SAT HDMI1 COAX COMP DVD HDMI2 Geen Geen Blu-ray HDMI3 Geen Geen GAME HDMI4 Geen Geen MEDIA PLAYER HDMI5 Geen Geen TV AUDIO Geen OPT Geen AUX Geen HDMI6 Wijzigt HDMI-ingangsopdrac
Tekens invoeren Schermtoetsenbord nnInvoermethode het scherm weer waarop 1 Geef u tekens kunt invoeren Selecteer een teken op de TV om tekens in te voeren. nnWeergave van een invoerscherm met toetsenbord (vblz. 98 “Overzicht van het menu”).
Audio Items die kunnen worden ingesteld met de “Audio”-procedure Menu bedienen Surround Parameter (vblz. 104) op MAIN om de zonemodus over te schakelen op MAIN 1 Druk ZONE. Klank (vblz. 105) MAIN-lampjes. • Druk op o of BACK om terug te keren naar het vorige item. • Om het menu af te sluiten, drukt u op SETUP wanneer het menu is weergegeven. De weergave van het menu verdwijnt. Volume (vblz. 106) U ziet het menu op de TV-scherm. Subwoofer-niveau (vblz. 106) M-DAX (vblz. 106) Audiovertraging (vblz.
Audio Items instellen Standaardinstellingen zijn onderstreept. U kunt de effecten voor het surroundgeluid naar wens instellen. De items (parameters) die kunnen worden aangepast, hangen af van het signaal dat wordt ingevoerd en de momenteel ingestelde geluidsmodus. Voor meer informatie over de aanpasbare parameters, zie “Geluidsmodi en surround-parameters” (vblz. 139). Effecten lage frequentie Stel het niveau van de lagefrequentie-effecten (LFE) in.
Audio Klank 0 – 7 (3) Hoe kleiner de waarde, hoe meer dialoog er wordt geconcentreerd op het middelste kanaal. Hoe groter de waarde, hoe meer dialoog wordt gedistribueerd naar de kanalen vooraan links en rechts en hoe meer het geluidsbeeld verbreedt vooraan. Pas de toonkwaliteit van het geluid aan. Items instellen Toonregeling Stelt de klankbesturingsfunctie in op “Aan” en “Uit”. Instellingen Aan : Toonaanpassing toestaan (hoge tonen, lage tonen). Uit : Weergave zonder toonaanpassing.
Audio Standaardinstellingen zijn onderstreept. Zet de subwoofer aan/uit en stelt het uitvoerniveau in. Items instellen Subwoofer Schakel subwooferuitgang in en uit. Pas handmatig de tijd aan als u een video kijkt, om het audiosignaal te vertragen. Instellingen Instellingen Aan : De subwoofer wordt gebruikt. Uit : De subwoofer wordt niet gebruikt. 0ms – 200ms OPMERKING Dit kan worden ingesteld wanneer de geluidsmodus is ingesteld op “DIRECT” of “PURE DIRECT” (vblz. 69) en de “Subwoofermodus” (vblz.
Audio Audyssey MultEQ®, Audyssey Dynamic EQ® en Audyssey Dynamic Volume®. instellen. Deze kunnen worden geselecteerd nadat Audyssey® setup werd uitgevoerd. Zie blz. 145 voor bijkomende informatie over Audyssey-technologie. OPMERKING Instellingen • “Audyssey”, “Audyssey Byp. L/R” en “Audyssey Flat” kunnen worden geselecteerd nadat Audyssey® setup is uitgevoerd. “Audyssey” wordt automatisch geselecteerd na het uitvoeren van “Audyssey® setup”. Wanneer “Audyssey”, “Audyssey Byp.
Audio Dynamic Volume Lost het probleem op van grote variaties in volumeniveau tussen TV, films en andere content (tussen rustige passages en luide passages, enz.) door automatisch bij te stellen naar de voorkeursvolumeinstelling van de gebruiker. Heavy : De grootste aanpassing tussen zacht en hard geluid. Medium : Middelmatige aanpassingsmogelijkheden tussen hard en zacht. Light : De minste aanpassingsmogelijkheden tussen hard en zacht. Uit : Geen gebruik van “Dynamic Volume”.
Video Menu bedienen 1 Items die kunnen worden ingesteld met de “Video”-procedure Beeldinstelling (vblz. 110) Druk op MAIN om de zonemodus over te schakelen op MAIN ZONE. Basisversie Videogerelateerde instellingen maken. HDMI Setup (vblz. 110) MAIN-lampjes. Uitgangsinstellingen (vblz. 111) U ziet het menu op de TV-scherm. Volumeweergave (vblz. 112) Infoweergave (vblz. 112) Geluidsweergave (vblz. 112) • Druk op o of BACK om terug te keren naar het vorige item.
Video Standaardinstellingen zijn onderstreept. Items instellen Instellingen Kies de instellingen voor HDMI video/audio-uitvoer. Items instellen Auto Lip Sync Automatische compensatie van tijdverschuiving in audioen video-uitvoer. HDMI audio uit Selecteer het uitvoerapparaat voor HDMIaudio. -6 – +6 (0) 0 – +12 -6 – +6 (0) HDMI bediening U kunt de bediening koppelen van aan HDMI aangesloten toestellen die compatibel zijn met HDMIbesturing.
Video Standby bron Stelt de HDMI-ingangsbron in om in stand-by te gaan wanneer het toestel wordt aangezet. Items instellen Laatste : Gaat in stand-by met de eerder gebruikte ingangsbron. CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CD : Gaat in stand-by met een van de ingangsbronnen die is toegewezen aan elke ingangsaansluiting. Videoconversie Het ingaande videosignaal wordt automatisch geconverteerd samen met de aangesloten TV (vblz.
Video Resolutie Stel de uitgaande resolutie in. U kunt “Resolutie” apart instellen voor HDMIuitvoer van analoge videoingangssignalen en HDMIinvoer. DVD Blu-ray GAME z AUX z MEDIA PLAYER z CD z NETWORK TV AUDIO z CBL/SAT DVD Blu-ray GAME z AUX z MEDIA PLAYER z CD z TV AUDIO z Dimensieverhouding Selecteer optimale progressive-modus voor videomateriaal. CBL/SAT Volumeweergave Standaardinstellingen zijn onderstreept. Hiermee geeft u op waar het mastervolumeniveau moet worden weergegeven.
Video Standaardinstellingen zijn onderstreept. Stel het videosignaalformaat in om als uitgang voor de door u gebruikte TV te dienen. Items instellen Formaat Instellingen NTSC : Selecteer NTSC-uitvoer. PAL : Selecteer PAL-uitvoer. OPMERKING Geavanceerde versie “Formaat” kan ook worden ingesteld door de volgende procedure. Het menuscherm wordt echter niet weergegeven. 1 Druk ten minste 3 seconden op STATUS en ZONE2 SOURCE op het hoofdtoestel. “V.Format : ” verschijnt op het scherm.
Ingangen Items die kunnen worden ingesteld met de “Ingangen”-procedure Menu bedienen Ingang toewijzen (vblz. 115) op MAIN om de zonemodus over te schakelen op MAIN 1 Druk ZONE. Bronhernoeming (vblz. 116) Bronnen verbergen (vblz. 116) 2 Druk op SETUP. ui om het te bedienen of in te stellen menu te 3 Gebruik selecteren. 4 Druk op ENTER of p de uw keuze te bevestigen. U ziet het menu op de TV-scherm. Bronniveau (vblz. 117) Ingangsselectie (vblz. 117) Videobron (vblz.
Ingangen Items instellen Voor dit toestel zijn bepaalde ingangsbronnen, zoals “CBL/SAT”, standaard toegewezen aan de audio- en video-aansluitingen. Door standaard aansluitingen te maken, kunt u gewoon op een knop voor de selectie van de ingangsbron drukken om gemakkelijk audio of video weer te geven vanaf het aangesloten apparaat. Wanneer u andere aansluitingen maakt dan de standaardinstellingen, moet u de instellingen in deze sectie wijzigen.
Ingangen DIGITAL Stel dit in om de digitale ingangsaansluitingen toegewezen aan de ingangsbron te wijzigen. CBL/SAT DVD Blu-ray GAME MEDIA PLAYER CD TV AUDIO CBL/SAT DVD Blu-ray GAME AUX CD MEDIA PLAYER TV AUDIO • Bij aankoop zijn de instellingen van de verschillende ingangbronnen zoals hieronder aangegeven.
Ingangen Standaardinstellingen zijn onderstreept. • Deze functie corrigeert het weergaveniveau van de geselecteerde audio-ingang van de signaalbron. • Kies deze instelling als er verschillen zijn in de ingangvolumeniveaus tussen de verschillende bronnen. Instellingen Items instellen Decodeermodus Stel de audiodecodeermodus in voor de ingangsbron.
Luidsprekers Items die kunnen worden ingesteld met de “Luidsprekers”-procedure Menu bedienen Audyssey® setup (vblz. 24, 86) Basisversie Instellen wanneer u de instellingen voor Audyssey® setup wijzigt. • Als u de luidsprekerinstellingen verandert nadat u de Audyssey® setup hebt uitgevoerd, is het niet mogelijk om Audyssey MultEQ®, Audyssey Dynamic EQ® en Audyssey Dynamic Volume® (vblz. 107). • Kan worden gebruikt zonder de instellingen te veranderen. Instellen indien nodig. Handmatige setup (vblz.
Luidsprekers Standaardinstellingen zijn onderstreept. Volg deze procedure om de luidsprekers handmatig in te stellen of om de met de Audyssey® setup procedure gemaakte instellingen te wijzigen. • Als u de luidsprekerinstellingen verandert nadat u de Audyssey® setup hebt uitgevoerd, is het niet mogelijk Audyssey MultEQ®, Audyssey Dynamic EQ® en Audyssey Dynamic Volume® te selecteren (vblz. 107). • U kunt “Handmatige setup” gebruiken zonder de instellingen te veranderen. Instellen indien nodig.
Luidsprekers Luidspr. config. (Vervolg) Instellingen Items instellen Front Height : Stel de aanwezigheid en de grootte van de front brede luidsprekers in. • Groot : Gebruik een grote luidspreker die op adequate wijze lage frequenties kan weergeven. • Klein : Gebruik een kleine luidspreker met onvoldoende weergavecapaciteit voor lage frequenties. • Geen : Selecteer wanneer de front hoogteluidsprekers niet zijn aangesloten. Lage tonen Instelling voor weergave van subwoofer en LFEsignaalbereik.
Luidsprekers Instellingen Items instellen Niveaus Stel het volume van de testtoon dusdanig in dat iedere luidspreker even luid speelt. Geef testtoon weer : Geef testtonen weer. • Front L / F.Height L / Center / F. Height R / Front R / Surround R / Surr. Back Rz / Surr. Back Lz / Surround L / Subwoofer : Selecteer de luidspreker voor het uitvoeren van de testtoon. zz Als de “Luidspr. config.” – “Surr. Back”-instelling (vblz. 119) wordt ingesteld op “1 luidspr.”, wordt “Surr. Back” weergegeven. • –12.
Netwerk Items die kunnen worden ingesteld met de “Netwerk”-procedure Informatie (vblz. 123) IP-besturing (vblz. 123) Schermnaam (vblz. 123) op MAIN om de zonemodus over te schakelen op MAIN 1 Druk ZONE. Instellingen (vblz. 124) Last.fm-display (vblz. 125) 2 Gebruik ui om het te bedienen of in te stellen menu te 3 selecteren. 4 Druk op ENTER of p de uw keuze te bevestigen. Druk op SETUP. U ziet het menu op de TV-scherm. Onderhoudsmodus (vblz.
Netwerk Schermnaam Toon netwerkinformatie. De Vriendelijke Naam is de naam voor dit toestel die in het netwerk wordt weergegeven. U kunt de Vriendelijke Naam wijzigen volgens uw voorkeur. Instellingen Schermnaam / DHCP=Aan of Uit / IP-adres / MAC-adres Er is een MAC-adres vereist om een vTuner-account te maken. Standaardinstellingen zijn onderstreept. Schakel de netwerkfunctie in of uit tijdens standby. Instellingen • De standaard Vriendelijke Naam bij eerste gebruik is “marantz NR1603”.
Netwerk Instellingen maken voor bedrade LAN. Stel uitsluitend “Instellingen” in bij het verbinden met een netwerk zonder de DHCP-functie. Netwerk Netwerk/Instellingen e Informatie DHCP IP-besturing IP-adres 192.168.000.001 Schermnaam Subnetmasker 255.255.255.000 Standaard gateway 255.255.255.000 Primaire DNS 000.000.000.000 Secondaire DNS 000.000.000.
Netwerk nn Proxy instellingen Maak deze instelling als u verbinding maakt met het internet via een proxy server. Geef de proxy-instellingen alleen op wanneer u een internetverbinding maakt via een proxyserver die op uw intern netwerk zit, door uw provider is geboden, enz. Netwerk/Instellingen Netwerk DHCP IP-besturing IP-adres 192.168.000.001 Schermnaam Subnetmasker 255.255.255.000 Standaard gateway 255.255.255.000 Primaire DNS 000.000.000.
Algemeen Menu bedienen 1 Items die kunnen worden ingesteld met de “Algemeen”-procedure Taal (vblz. 127) Druk op MAIN om de zonemodus over te schakelen op MAIN ZONE. ZONE2 setup (vblz. 127) MAIN-lampjes. Zone herbenoemen (vblz. 127) U ziet het menu op de TV-scherm. Automatische standby (vblz. 127) Display voorzijde (vblz. 128) Informatie (vblz. 128) • Druk op o of BACK om terug te keren naar het vorige item. • Om het menu af te sluiten, drukt u op SETUP wanneer het menu is weergegeven.
Algemeen Standaardinstellingen zijn onderstreept. Zone herbenoemen Verander de schermtitel van iedere zone in een titel van uw voorkeur. Stel de taal voor weergave op het menuscherm in. Instellingen Instellingen English / Deutsch / Français / Italiano / Español / Nederlands / Svenska Automatische standby Standaardinstellingen zijn onderstreept.
Algemeen Standaardinstellingen zijn onderstreept. Geeft informatie over de ontvangerinstellingen, ingangssignalen, enz. Past de helderheid aan van de display van het toestel. Items instellen Weergeven Informatie Instellingen Items instellen Aan : Display is altijd aan. Auto-uit : Display is uit behalve wanneer het statusdisplay wordt getoond. Uit : Het display is altijd uit.
Algemeen Instellingen MAIN ZONE : Dit item toont informatie over instellingen voor MAIN ZONE. De weergegeven informatie verschilt afhankelijk van de ingangsbron. • ZONE naam / Selecteer bron / Naam / Geluidsmodus / Ingangsmodus / Decodeermodus / Digitaal / Component / Video select / Video-modus / Content Type / Videoconversie / i/p scaler / Resolutie / Progressive modus / Dimensieverhouding etc. ZONE Informatie tonen over huidige instellingen.
Algemeen Items instellen Instellingen Notificatie Toont een bericht op het menuscherm van dit toestel waarin wordt meegedeeld wanneer de recentste firmware werd uitgegeven met “Update”. Toont een bericht op het menuscherm van dit toestel waarin wordt meegedeeld wanneer de downloadbare firmware werd uitgegeven met “Mogelijkh. toevoeg.”. Update : De mededeling wordt ongeveer 20 seconden weergegeven, nadat de stroom is ingeschakeld. Maak verbinding met breedbandinternet (vblz.
Algemeen Standaardinstellingen zijn onderstreept. Bescherm alle instellingen tegen ongewenste wijzigingen. Items instellen Zet op slot Instellingen Aan : Schakel bescherming in. Uit : Schakel bescherming uit. Basisversie Setup slot Stel “Zet op slot” in op “Uit”, wanneer u de instelling annuleert. Geavanceerde versie OPMERKING Wanneer “Zet op slot” is ingesteld op “Aan”, dan kunnen de hieronder vermelde items niet meer worden veranderd.
Informatie Hier geven we diverse informatie over het toestel. Raadpleeg deze informatie indien nodig. F Overige informatie vblz. 138 F Probleemoplossing vblz. 148 Geavanceerde versie F Namen en functies van onderdelen vblz. 133 Basisversie Informatie F Technische gegevens vblz. 153 DVD 132 Informatie F Index vblz.
Namen en functies van onderdelen Basisversie Voorpaneel Toetsen die hier niet worden beschreven, worden beschreven op de tussen haakjes ( ) vermelde bladzijde. W0 Q9 Q8 Q7 Q6 Q5 Geavanceerde versie W1 Informatie qw q STANDBY-indicator·································································· (31) GSTANDBY-indicatorstatusH • Voeding aan : Uit • Normale stand-by : Rood • Wanneer “HDMI bediening” (vblz. 110) ingesteld op “Aan”: Oranje • Wanneer “IP-besturing” (vblz.
Display Q1 Q0 o i u y q Informatiedisplay u Inslaaptimerindicator Hier worden de naam van de ingangsbron, de geluidsmodus, de instelwaarden en overige informatie getoond. w Ingangssignaalindicators e ZONE2 indicators Q0 Decoderindicators Dit licht op wanneer de slaapmodus is geselecteerd (vblz. 90, 97). i Tuner ontvangstmodus indicators r MUTE-indicator Dit licht op wanneer de dempingsfunctie is geselecteerd (vblz. 32).
Achterpaneel Q2 Q1 o Q0 Basisversie Worden beschreven op de tussen haakjes ( ) vermelde bladzijde.
Afstandsbediening i q o Q0 q ZONE SELECT-toetsen (MAIN, ZONE2)······································ (25, 96) w Ingangsbronkeuzetoetsen···················· (31, 96) e Toetsen kanaal/pagina zoeken (CH/PAGE df) ·································· (35, 38, 49, 52, 56, 60, 62) w ···························· (103, 109, 114, 118, 122, 126) y Systeemtoetsen ···················································· (35, 38, 56, 60) • Overslaantoetsen (8, 9) • Toets weergave/pauzeren (1/3) r Q2 Q3 Q4 Q5 Q6 t y
Afstandsbediening Werkingsbereik van de afstandsbediening q Verwijder de het achterste deksel in de richting van de pijl en verwijder het. Richt de afstandsbediening tijdens het gebruik ervan op de afstandsbedieningssensor van het toestel. w Plaats de twee batterijen en let hierbij op de aanduidingen in het batterijencompartiment. De zone opgeven die wordt gebruikt met de afstandsbediening Wanneer u op de toets ZONE2 drukt, kan alleen de MAIN ZONE worden bediend met de afstandsbediening.
Overige informatie Informatie handelsmerk Dit product gebruikt de volgende technologieën (Willekeurige volgorde): Geproduceerd onder de licentie van de Amerikaanse octrooinummers: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567. Andere Amerikaanse en internationale octrooien zijn verleend en in behandeling. DTS-HD,het symbool, en DTS-HD samen met het symbool, zijn gedeponeerde handelsmerken & DTS-HD Master Audio is een handelsmerk van DTS, Inc. Product bevat software.
Surround Basisversie Dit toestel is uitgerust met digitale geluidsprocessors waarmee u programmabronnen kunt weergeven in de geluidsmodus waarmee u hetzelfde gevoel kunt ervaren als in een bioscoop. Geluidsmodi en surround-parameters In deze tabel vindt u de luidsprekers die u in elke geluidsmodus kunt gebruiken, en de surround-parameters die in elke geluidsmodus instelbaar zijn. Symbolen in de tabel S Dit symbool staat voor de uitgangkanalen voor audio of de instelbare surround-parameters.
Surround NEO:6 uitsluitend de muziekmodus Geluidsmodus (vblz. 69) Panorama (vblz. 104) Dimensie (vblz. 104) Center breedte (vblz. 105) Center Image (vblz. 104) DIRECT/PURE DIRECT (2-kanaals)z1 DIRECT/PURE DIRECT (Meerkanaals)z1 Subwoofer (vblz. 106) Tone z11 (vblz. 105) Audyssey z12 (vblz. 107) MultEQ® (vblz. 107) Dynamic EQ z13 (vblz. 107) Dynamic Volume z13 (vblz. 108) M-DAX z14 (vblz. 106) Basisversie Surround Parameter (vblz.
Surround Basisversie nnDe typen ingangssignaal en de bijbehorende geluidsmodi In deze tabel vindt u de ingangssignalen die u in elke geluidsmodus kunt weergeven. Controleer het audiosignaal van de ingangsbron en selecteert vervolgens de geluidsmodus. Symbolen in de tabel F Dit symbool staat voor de standaard geluidsmodus. S Dit symbool staat voor de selecteerbare geluidsmodus. Typen ingangssignaal en formaten Geluidsmodus (vblz.
Surround Geluidsmodus (vblz. 69) OPMERKING DOLBY DTS EXPRESS DTS ES MTRX (met vlag) DTS (5.1-kanaals) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (met vlag) DOLBY DOLBY DIGITAL EX DIGITAL (zonder vlag) (5.
Relatie tussen videosignalen en monitoruitgang Videoconversie Aan HDMI COMPONENT A Uitgangsaansluiting VIDEO A A A S
Relatie tussen videosignalen en monitoruitgang Wanneer “Videoconversie” (vblz. 111) is ingesteld op “Aan”, wordt “i/p scaler” (vblz. 111) ingesteld op “Analoog”, als “Analoog & HDMI” of “HDMI” zijn ingesteld, kan de resolutie van het ingangsvideosignaal worden geconverteerd naar een andere resolutie voor de uitvoer (vblz. 6 “Ingangsvideosignalen converteren voor weergave (Videoconversiefunctie)”).
Uitleg termen D Deep Color Een beeldverwerkingstechnologie die wordt ondersteund door HDMI. In tegenstelling tot RGB die 8 bits (256 schakeringen) per kleur gebruikt, kan deze technologie 10 bits (1024 schakeringen), 12 bits (4096 schakeringen) of 16 bits (65536 schakeringen) gebruiken om kleuren in een hogere definitie te produceren. Beide apparaten die via HDMI zijn verbonden, moeten Diepe kleur ondersteunen.
Uitleg termen F FLAC FLAC staat voor “Free Lossless Audio Codec” en is een free lossless audiobestandsformaat. Lossless betekent dat de audio wordt gecomprimeerd zonder kwaliteitsverlies. De FLAC licentie wordt hieronder aangegeven. Copyright (C) 2000,2001,2002,2003,2004,2005,200 6,2007,2008,2009 Josh Coalson 146 I iTunes iTunes is de naam van de multimedia-speler van Apple Inc. Met deze app kunt u multimedia-inhoud, inclusief muziek en films beheren en afspelen.
Uitleg termen V vTuner Dit is een gratis toegankelijke contentserver voor internetradio. Upgradeprijzen zijn inclusief de gebruikskosten. Surf voor meer informatie over deze service naar de website van vTuner. vTuner website: http://www.radiomarantz.com Dit product wordt beschermd door bepaalde intellectuele eigendomsrechten van Nothing Else Matters Software en BridgeCo.
Probleemoplossing GHDMIH Symptoom Blz. • Controleer of de stekker goed in het stopcontact zit. • Het beveiligingscircuit is actief. Haal de stekker uit het stopcontact, wacht 5 tot 10 seconden en sluit het snoer opnieuw aan. 31 145 De voeding schakelt automatisch naar de stand-bymodus. • De slaaptimer is ingesteld. Schakel de voeding opnieuw in of wijzig de instellingen van de slaaptimer.
GAudioH Symptoom Symptoom Blz. • Controleer de aansluitingen van alle apparaten. 9, 10, 13, 14, 15,16,17,18, 19,20,21,22 • Controleer de luidsprekeraansluitingen en -configuratie 78,79,80,81, 82,83,84,85 Het volume verhoogt • Het maximumvolume is te laag ingesteld. Stel het maximumvolume niet. in via “Limiet” in het menu. • De voeding voor externe apparaten die op de uitgangen van het toestel zijn aangesloten, is mogelijk niet ingeschakeld. Controleer de voeding van de aangesloten externe apparaten.
GFMH Symptoom Symptoom • Verander de richting of de stand van de antenne. • Gebruik een FM-buitenantenne. • Verwijder de antenne van andere aansluitingskabels. Blz. Geen weergave van internetradio. 20 20 20 GiPod / USB-geheugenapparaat / Internetradio / Media server / Last.fm / FlickrH Symptoom Oorzaak / Oplossing iPod kan niet worden • Sommige iPod’s werken niet als ze rechtstreeks worden afgespeeld. aangesloten op de iPod/USB-poort. Blz.
Oorzaak / Oplossing Blz. Er kan geen verbinding worden gemaakt met voorkeuzezenders of favoriete zenders. • De zender heeft momenteel geen uitzending. Probeer het later opnieuw. • De zender verzorgt geen uitzendingen meer. Er kan niet worden afgestemd op zenders die geen uitzendingen meer verzorgen. – Er wordt geen lijst weergegeven van zendstations. • De verbinding met het netwerk is onstabiel. Maak de verbinding met het netwerk opnieuw of geef de instelling "Netwerk" opnieuw op in het menu.
De microprocessor resetten X ON/STANDBY INTERNET RADIO Herhaal de procedure vanaf stap 1 als de display in stap 3 niet begint te knipperen met een interval van ongeveer 1 seconde. DVD 152 Informatie 1 Schakel de netspanning uit met X. op X ON/STANDBY terwijl u tegelijkertijd INTERNET RADIO en ZONE2 2 Druk SOURCE ingedrukt houdt. de twee toetsen los zodra de display begint te knipperen met een interval van 3 Laat circa 1 seconde.
Technische gegevens nn Tunergedeelte • Vermogensversterker Nominaal vermogen: Afstembereik: Bruikbare gevoeligheid: 50 dB dempingsgevoeligheid: Signaal-ruis verhouding : Totale harmonische vervorming nn Algemeen Voeding: 230 V wisselstroom, 50/60 Hz Stroomverbruik: 220 W Stroomverbruik in stand-bymodus: 0,2 W Stroomverbruik in CEC stand-bymodus: Stroomverbruik in netwerkstand0,5 W bymodus: 2,7 W Veranderingen in technische gegevens en ontwerp voorbehouden.
Index vvB vvA vvD Decodeermodus················································ 117 Deep Color·················································· 11, 145 De ingangsbron selecteren································· 31 De microprocessor resetten····························· 152 Dempingsniveau······································· 106, 127 De stroom inschakelen······································· 31 Dialoog······························································ 105 Dialoogniveau····················
vvL vvR vvO vvT Taal···································································· 127 Tekens······························································· 102 Tekens invoeren················································ 102 Tint···································································· 110 Toonregeling····················································· 105 TP········································································ 48 Tv-formaat·······································
Dimensies Basisversie 55,5 225,0 367,0 16,0 340,0 105,0 90,5 50,0 14,5 55,0 50,0 Gewicht : 8,3 kg DVD 156 Informatie 440,0 Geavanceerde versie 328,5 48,0 22,5 Eenheid : mm
V00 D&M Holdings Inc.