Owners manual

USB100 User’s Manual
2.4 Mounting the USB100
Attach the USB100 securely to the vessel using the included brass mounting screws or other
fasteners as shown in Figure 1 below. Do not use threadlocking compounds containing
methacrylate ester, such as Loctite Red (271), as they will cause stress cracking of the plastic
enclosure.
Figure 1 – Mounting the USB100
2.5 Connecting the USB100
The Maretron USB100 provides a connection to an NMEA 2000® interface through a
connector that can be found on the end of the device (see Figure 2).
Page 6 Revision 1.5