Owners manual

USB100 User’s Manual
Figure 3 – NMEA 2000® Connector Face Views
2.5.1 Checking Connections
Once the NMEA 2000® and USB connections to the Maretron USB100 have been completed,
check to see that information is being properly transmitted by observing that your computer
software is receiving NMEA 0183 sentences via the USB port. Refer to Section 4,
“Troubleshooting”, if no information appears.
2.6 Configuring the USB100
As shipped from the factory, the USB100 does not require any special configuration and will
work for most applications. However, there are two configurable items in the USB100 which
includes: 1) NMEA 2000® to NMEA 0183 sentence translations and 2) NMEA 2000® device
selection.
2.6.1 NMEA 2000® to NMEA 0183 Sentence Translations
The following table shows the NMEA 2000® PGNs received from an NMEA 2000® network
and the corresponding translations to NMEA 0183 sentences for use by the PC.
Page 8 Revision 1.5