Specification Sheet

Output voltage: 3.0V RMS single-ended at full scale
(0dBFS)
6.0V RMS balanced at full scale
(0dBFS)
Total harmonic
distortion + noise: <0.004%, 20Hz to 20kHz, single-ended,
3V RMS output (44.1kHz/16 bit signal)
<0.003%, 20Hz to 20kHz, balanced,
6V RMS output (44.1kHz/16 bit signal)
<0.003%, 20Hz to 20kHz, single-ended,
3V RMS output (192kHz/24 bit signal)
<0.002%, 20Hz to 20kHz, balanced,
6V RMS output (192kHz/24 bit signal)
Signal-to-noise ratio: >94dB single-ended (wideband,
unweighted, referred to 3V RMS output)
>106dB balanced (wideband,
unweighted, referred to 6V RMS output)
Power consumption: Standby: <0.4W
Power on: 32W
Digital audio
connectors: 1 optical digital input (Toslink)
1 coaxial digital S/PDIF input (RCA)
1 optical digital output (Toslink)
1 coaxial digital S/PDIF output (RCA)
MARK LEVINSON
N
o
_
5101
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329
marklevinson.com
©2020 HARMAN International Industries, Inc. Mark Levinson and the Mark Levinson logo are trademarks of HARMAN International Industries, Inc.,
registered in the United States and other countries. All rights reserved. Features, specifications and appearance are subject to change without notice.
All production №5101 units will undergo 100% functional testing prior to shipment, and the following features and electrical
measurements will be verified on all units.
Output connectors: 1 pair single-ended line-level outputs
(RCA)
1 pair balanced line-level outputs
(XLR)
Control and network
connectors: 1 RS-232 port
(DB9 connector)
1 IR input
(⅛"/3.5mm phone jack)
1 12V DC trigger input
(⅛"/3.5mm phone jack)
1 Ethernet port
(RJ-45 connector)
1 USB-A connector
1 Wi-Fi antenna connector
(SMA receptacle)
Performance Specifications