Owner's Manual

14
N
0
5805 / N
0
5802 INTEGRATED AMPLIFIER / OWNER’S MANUAL
REMOTE CONTROL OPERATION
Battery Installation
Your N
0
5805 / N
0
5802 remote control comes with two AAA
alkaline batteries. To install the batteries, use the included
hex tool to remove the battery cover, insert the batteries and
replace the battery cover and hex screw. Be sure to observe
proper battery polarity.
standby
input
volume
enter menu
balance mute
Using the Remote Control
When using the remote control, aim it toward the unit’s front
panel IR receiver. Make sure that no objects, such as furniture,
block the remote’s view of the receiver. Bright lights, fluorescent
lights, and plasma video displays may interfere with the function
of the remote.
The remote has a range of about 17 feet (5m), depending on
the lighting conditions.
You can use the remote at an angle of up to 45° on either side
of the unit.
Placing the amplifier behind tinted glass will reduce the
remote controls effective range.
If the remote control operates intermittently, replace both
batteries with new ones.
CONTROL