Owner's Manual
15
N
0
5805 / N
0
5802 INTEGRATED AMPLIFIER / OWNER’S MANUAL
BROWSER SETUP PAGE (BSP)
The BSP is a highly conveient means of keeping the firmware of
your amplifier up to date, for performing setup functions, and
monitoring operational faults and temperature. It is accessed
via a major web browser on a PC or tablet. In order to access the
BSP, you must first connect the unit to your Local Area Network
(LAN). If there is no easy access to a LAN there are other means
of setup and control, discussed elsewhere in this manual.
• Connect the Ethernet port on the rear panel of the N
0
5805 /
N
0
5802 to an ethernet port on your home network’s router,
switch or hub with a Category 5e or Category 6 Ethernet cable.
• Find the IP address of your unit by navigating through the
Setup menu to Advanced/Network/IP.
• Open a browser in a PC or tablet that is connected to your
home LAN.
• Enter the IP address of your unit in the address line.
• The amplifier’s Browser Setup Panel Home page will appear
on the screen.
• The BSP controls are intuitive and behave much like the front
panel and remote controls.
NOTE: We do not recommend using the BSP as a
substitute for the front panel or remote controls for real-
time volume, input selection or any other listening mode
functions due to network latencies.
NOTE: The front panel display is replicated on the top of
Home
and
Advanced
Update pages
CONTROL