Owner's Manual

22
N
0
5805 / N
0
5802 INTEGRATED AMPLIFIER / OWNER’S MANUAL
POWER
Setup Menu Power
Input
Standby = XXX
Volume
Auto Off= On/Off
Power
Display
Advanced
The Power parameters let you customize power-related
functions.
Standby: This setting lets you set the Standby mode to one of
the following options:
Green: This mode removes power from almost all of the
N
0
5805 / N
0
5802’s circuits, allowing the unit to be activated
only via an IR control signal, a 5V – 12V trigger voltage or a
press of the
Standby button. This mode provides maximum
power conservation and is the factory-default
Standby mode.
Power Save: This mode removes power from the N
0
5805
/ N
0
5802’s audio circuits but keeps the control circuitry
powered and ready to receive commands from any of
the control inputs. This mode provides moderate power
conservation.
Normal: This mode shuts off the unit’s display and mutes its
audio outputs, but keeps all of its control and audio circuits
powered. This mode provides the least amount of power
conservation but allows the audio circuits to remain warmed
up to deliver optimal performance at all times.
Auto Off: This setting lets you engage or disengage the Auto
Off function, which puts your N
0
5805 / N
0
5802 into the Standby
mode after 20 minutes of inactivity (no audio signal, and no
user- control input).
DISPLAY
Setup Menu Display
Input
Auto Off = On/Off
Volume
Timer = 10s/3s
Power
Display
Advanced
The Display function allows you to choose whether the front
panel display stays on all the time), or turns off after a selectable
amount of time.
Auto Off: When set to Off, the display remains lit as long as the
unit is in listening mode. When set to On, the display will turn off
after 3, 5 or 10 seconds.
Timer: The timer determines when the display turns off, after
3, 5, or 10 seconds.
SETUP