Owner's Manual

5805 / N

5802 INTEGRATED AMPLIFIER / OWNER’S MANUAL

MOVING-COIL MODE

Input Resistance: Selectable, 37Ω to 1000Ω

Gain: 69dB at 1kHz

Total Harmonic Distortion: <0.01%, 1kHz, 2V RMS output; <0.06%, 20kHz, 2V RMS output

Signal-To-Noise Ratio: >71dB (20Hz to 20kHz A-weighted, referred to 2V RMS output);

>66dB (20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output)

Maximum Input Level: >6.5mV at 1kHz; >19mV at 20kHz

DIGITAL-TO-ANALOG CONVERTER STAGE

Output Voltage: 5.7V RMS at maximum volume/full scale (0dBFS)

Frequency Response: 20Hz to 20kHz, +0/–0.05dB (44.1kHz/16 bit signal); 20Hz to 20kHz, +0/–0.02dB (192kHz/24 bit signal)

Total Harmonic Distortion: <0.0025%, 20Hz to 20kHz,at 3V RMS output (192kHz/24 bit signal);

<0.003%, 20Hz to 20kHz, at 3V RMS output (44.1kHz/16 bit signal);

<0.006%, 90kHz, at 3V RMS output (192kHz/24 bit signal)

Signal-To-Noise Ratio: >100dB (20Hz to 20 kHz, 192kHz/24 bit signal, A-weighted);

>98dB (20Hz to 20 kHz, 192kHz/24 bit signal, wideband, unweighted);

>94dB (20Hz to 20 kHz, 44.1kHz/16 bit signal, A-weighted);

>92dB (20Hz to 20 kHz, 44.1kHz/16 bit signal, wideband, unweighted)

Referred to 3VRMS output

Sample Rates/Bit Depth: PCM: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, or 384kHz; up to 32 bits; DSD: Native or DoP; single,

double, or quad speed (2.8, 5.6, or 11.2MHz)

Digital Processing: Full MQA decoding; PCM: Seven user-selectable digital filter settings;

user-selectable up-sampling to 352.8/384kHz; DSD: Four user-selectable digital filter settings

HEADPHONE OUTPUT

Total Harmonic Distortion: <0.04%, 20Hz and 1kHz, 2V RMS output, 30Ω load; <0.10%, 20kHz, 2V RMS output, 30Ω load

Output Overload: >3.3V RMS, 30Ω load

Signal-To-Noise Ratio: >91dB (20Hz to 20kHz, A-weighted, referred to 2V RMS output); >87dB (20Hz to 20kHz, wideband,

unweighted, referred to 2V RMS output

Output Impedance: <2.5Ω, 20Hz to 20kHz

SPECIFICATIONS