User Manual

3
N
0
536 MONAURAL / N
0
534 DUAL-MONAURAL AMPLIFIER / OWNER’S MANUAL
ENGLISH
INSTALLATION CONSIDERATIONS
SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this apparatus near water
6. Clean only with a dry cloth
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point where
it exits from the apparatus.
11.
Only use attachments and accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by
the manufacturer or sold with the apparatus. When
a cart is used, use caution when moving the cart/
apparatus combination to avoid injury or tip over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as when the power-supply cord or plug is damaged; liquid has been
spilled or objects have fallen into the apparatus; or the apparatus
has been exposed to rain or moisture, does not operate normally or
has been dropped.
15. The MAINS cord is intended to be the safety disconnect device for
this apparatus and shall remain readily operable at all times.
16. Ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, tablecloths, or curtains.
17. No naked flame sources, such as candles, should be placed on the
apparatus.
18. Terminals marked with this symbol may be considered HAZARDOUS
LIVE, and the external wiring connected to these
terminals requires installation by an INSTRUCTED
PERSON or the use of ready-made leads or cords.
19. This product must be terminated with a three-conductor AC mains
power cord that includes an earth ground connection. To prevent
shock hazard, all three connections must ALWAYS be used.
WARNING! To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, shall be
placed on the apparatus.
SAFETY TERMS & SYMBOLS
These terms may appear in this manual:
Warning! Calls attention to a procedure, practice, condition or
the like that, if not correctly performed or adhered to, could
result in personal injury or death.
Caution! Calls attention to a procedure, practice, condition or
the like that, if not correctly performed or adhered to, could
result in damage or destruction to part or all of the component.
Note Calls attention to information that is essential to highlight.
These symbols may appear on the product:
Appears on the component to indicate the presence of
noninsulated, dangerous voltage inside the
enclosure – voltage that may be sufficient to
constitute a risk of shock.
Appears on the component to indicate important
operation and maintenance instructions included in
the accompanying documentation.
UNPACKING
When unpacking your amplifier:
• Save all packing materials in case you need to ship your
amplifier in the future.
• Inspect your amplifier for signs of damage during shipment. If
you discover damage, contact your authorized Mark Levinson
dealer for assistance in making appropriate claims.
• Please register your amplifier within 15 days of purchase at
marklevinson.com.
• Retain your original, dated sales receipt as proof of warranty
coverage.
• Remove the accessory box from the shipping carton. Make
sure that all of the items listed below are included. If any are
missing, contact your authorized Mark Levinson dealer.
o IEC power cord (terminated according to the region to
which the unit is shipped)
INSTALLATION CONSIDERATIONS