user manual

DESCRIPTION OF CONTROLS & OPERATION
FRONT VIEW MONITOR UNIT
1. TIME CONTROL KNOB
To vary the display switching speed from 3 to 60 seconds. When
the system is in the auto mode with more than one camera, this
knob enables you to vary the time each camera picture will be dis-
played on the monitor. In order to increase the switching time, turn
this knob in clockwise direction. Turning this knob all the way in
counter clockwise direction will quickly step through the camera
images.
2. VOLUME CONTROL KNOB
Adjust the volume control knob to reach the desired volume level.
3. CONTRAST CONTROL KNOB
To adjust the CONTRAST of the screen.
4. BRIGHTNESS CONTROL KNOB
To adjust the BRIGHTNESS of the screen.
5. VERTICAL HOLD CONTROL KNOB
To adjust the VERTICAL synchronization.
6. VCR ON/OFF SELECTOR
Press it to review the video signal from the VCR.
Press it again to switch back to the camera signal.
VCR Recording Reviewing Method
1) Connect the monitor to the VCR and press the RECORD button
on the VCR to start recording the pictures. The VCR will record the
3OBSERVER25

1
2 3
6
5
4
PUSH
TALK
1
234
AUTO
POWER
7 11 8 9 10
12