user manual

INSTALLATION OF THE MONITOR
1-4 Camera connections
Using the provided plug&play cable, connect the camera to the monitor as
shown in the diagram on the next page.
Plug the AC cord into an 230V outlet
Power the monitor by pressing the green power button
1. Camera 1 Terminal
Connect camera 1 cable to this terminal
2. Camera 2 Terminal
Connect camera 2 cable to this terminal.
3. Camera 3 Terminal
Connect camera 3 cable to this terminal.
4. Camera 4 Terminal
Connect camera 4 cable to this terminal.
AUDIO/VIDEO JACK CONNECTIONS.
Refer to the following connection method, for connecting a VCR or time lapse recorder
Monitor VCR Terminal
Video OUT Video IN
Audio OUT Audio IN
Video IN Video OUT
Audio IN Audio OUT
NOTE : The cable for this connection is not supplied with the unit.
An "RCA" type cable is required.
8 MARMITEK
1
2
3
4
C1 C2 C3 C4
AC power cord