Operation Manual

SUBWOOFER ANYWHERE 635
7
ENGLISH
INSTALLING THE SUBWOOFER ANYWHERE
635 TRANSMITTER
You connect the subwoofer output of your surround set or TV to
the transmitter.
1. Use the supplied adapter cable to connect the Subwoofer
Anywhere 635 transmitter to the subwoofer output jack of
your audio system.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Subwoofer Anywhere 635 transmitter will now
automatically switch on and the green LED will begin to flash.
4. Now the sound of your audio source will be reproduced.
INSTALLING THE SUBWOOFER ANYWHERE
635 RECEIVER
1. Use the converter cable supplied to connect the Subwoofer
Anywhere 635 receiver to the LFE/LINEX IN coaxial
(Cinch/RCA) connection on your Active Subwoofer.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Subwoofer Anywhere 635 receiver will now
automatically switch on and the green LED will begin to flash.
The transmitter and receiver will now establish a connection, after
which you will hear your subwoofer sound coming from the active
subwoofer that is connected to the receiver. The green LED will
stop flashing and then stay illuminated.
EXTRA RECEIVER
Extra receiver for your Subwoofer Anywhere 635.
With an extra receiver, you can receive the sender’s signal at
more places in your house.